Messages

1

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3.2 in less than 5 minutes (linux)

« on: July 05, 2017, 03:00:30 AM »

Thanks for your response. Your tutorial and generator helped me a lot and I will continue using it.

I would maybe pay for more features if this becomes concrete, but as you say, probably there aren't enough people to pay for the time it would consume.

Anyway, I appreciate using your script and also the more important function for me, start/stop all pairs, is working now. Thanks again.

2

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3.2 in less than 5 minutes (linux)

« on: July 04, 2017, 06:48:49 PM »

It's working now! I think I did it like this yesterday, and when I tried to use .stop_bots.sh it showed "command not found" (if I remember right).

However, thank you again for your help! And also thanks for your script cw!

I have another question. Is it possible to edit the configs of all pairs at once. When I use 'ginit' I can edit all pairs, but I can't edit settings of 'POLONIEX_VWA_1_INTERVAL' / 'POLONIEX_VWA_2_INTERVAL' or 'MAX_LATEST_PRICES' (for example).

Hope this question wasn't asked before, but I haven't found a solution.

3

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3.2 in less than 5 minutes (linux)

« on: July 04, 2017, 02:32:18 AM »

Can somebody tell me the code to stop all pairs/stop the bot?

I only know how to stop single pairs.

I wrote a couple start/stop scripts detailed here on the forums that does this safely and without generating issues with the exchanges.    That way, you can just do start_bots.sh and stop_bots.sh.

You could use commands like "gstop all" and "gstart all" and "pm2 stop all" and "pm2 start all" but unless they've been modified since I last looked at them, they just start and stop them quickly, which makes places like polo and kraken run into API limits.  So that's why I wrote the scripts.

Would you explain me how to paste the code correctly?

I connect via ssh to my server and just paste your code, right?

When I do, I see this:


What am I doing wrong?

4

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3.2 in less than 5 minutes (linux)

« on: July 01, 2017, 08:31:00 PM »

Can somebody tell me the code to stop all pairs/stop the bot?

I only know how to stop single pairs.

5

Technical Support & Development / Re: How much pairs per API?

« on: June 25, 2017, 12:39:11 AM »

So why Gunthar suggests this?

6

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3.2 in less than 5 minutes (linux)

« on: June 24, 2017, 05:11:13 AM »

What does this message mean?

? Overwrite poloniex-BTC_BTS-config.js? overwrite
    force poloniex-BTC_BTS-config.js
 conflict poloniex-BTC_CLAM-config.js

I edited all pairs via 'ginit' and tried to overwrite the new settings. When I check a pair now, it has the new settings and 'gl' shows all pairs online. Should I do something now because of the conflict?

7

General Discussion / Re: Improvment suggestion to minimize bagholdings

« on: June 24, 2017, 04:42:29 AM »

I just searched for a website to do this manually but couldn't find one.

I think this would be a very powerful function directly implemented in Gunbot.

8

Beginners & Help / Re: Gunbot Configuration Guide (WIP)

« on: June 24, 2017, 01:24:00 AM »

Very nice, thanks a lot!

9

Technical Support & Development / Re: How much pairs per API?

« on: June 24, 2017, 01:12:33 AM »

I just found the answer:

If you go higher than 20-25 pairs, I suggest you use 2 or more different API keys: you don't have to pay for it, you can generate new API keys and send them to me to be added to your license. Beware tho: do not abuse exchanges limits, we are welcome at exchanges with our bots because we generate fees, but the system needs to be workable for everyone.

https://gunthy.org/index.php?topic=306.0

10

General Discussion / Re: Simple BB explanation needed

« on: June 24, 2017, 12:39:26 AM »

@Clannad

Thanks you very much for the graphic explanation, now i fully understand how it works! 

11

General Discussion / Re: Newbie here. Looking forward to getting started

« on: June 23, 2017, 10:40:58 PM »

I directly paid Gunthar without Bitify or any other escrow. If you read his posts on Bitcointalk and in this forum, you should see that he isn't a scammer. Of course, there is no guarantee, but if you can avoid services like Bitify you should do it, because they take fees for the payment, and this fees should go into Gunthar's pocket I think.

12

Technical Support & Development / How much pairs per API?

« on: June 23, 2017, 01:54:20 AM »

In the Telegram group and in this forum, I've read that people use 30 till 50 pairs with one API. I think Gunthar wrote somewhere that only 17 pairs per API are recommended, because otherwise Poloniex will ban your IP. Can somebody say if it's ok to run so many pairs per API? If yes, I don't have to send Gunthar many more APIs for enabling.

13

Beginners & Help / Re: GUNBOT...the way i run it!

« on: June 23, 2017, 01:18:19 AM »

Set lowBB and highBB to values between 20 and 35 (for example lowBB 21 and highBB 29 or lowBB 24 and highBB 27 or any other value you wish.

Do you recommend to stay always between 20 and 35? I am already trying out 10 / 10 for example, but I have to wait to post some stats.

Thanks to Gunthar and all contributors of Gunbot (especially beer-k0in for his Linux VPS tutorial)! I am using this software for some days now and trying different settings with three bots actually. Very exciting.

14

Technical Support & Development / Re: Multiple accounts for every Gunbot?

« on: June 22, 2017, 06:29:35 PM »

Do you create for every Gunbot a new account on exchanges? Or do you just use one account and create a new API key for every bot? I think for stats it's better to use multiple accounts. Is it similar for the Gunbot script if I use one or multiple accounts?

it's better to use multiple accounts, yes, i do same.

Is there no danger in getting banned from this?

You can officially "link" your accounts among themselves. So I think and hope that this is allowed.

I would like to know if it's allowed on Bittrex and Kraken? I can't find a function like "link accounts" on Bittrex.

Interesting...I"m not seeing the option to do this though - where is it for you?

> my profile
> linked accounts

15

Technical Support & Development / Re: Multiple accounts for every Gunbot?

« on: June 22, 2017, 05:43:44 PM »

Do you create for every Gunbot a new account on exchanges? Or do you just use one account and create a new API key for every bot? I think for stats it's better to use multiple accounts. Is it similar for the Gunbot script if I use one or multiple accounts?

it's better to use multiple accounts, yes, i do same.

Is there no danger in getting banned from this?

You can officially "link" your accounts among themselves. So I think and hope that this is allowed.

I would like to know if it's allowed on Bittrex and Kraken? I can't find a function like "link accounts" on Bittrex.

16

Technical Support & Development / Re: Multiple accounts for every Gunbot?

« on: June 21, 2017, 04:27:56 PM »

So I create another account on Poloniex and don't have to buy a new license for this account?

17

Technical Support & Development / Multiple accounts for every Gunbot?

« on: June 20, 2017, 06:02:03 PM »

Do you create for every Gunbot a new account on exchanges? Or do you just use one account and create a new API key for every bot? I think for stats it's better to use multiple accounts. Is it similar for the Gunbot script if I use one or multiple accounts?

18

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3.2 in less than 5 minutes (linux)

« on: June 20, 2017, 07:37:02 AM »

No. All Versions of Gunbot are using the same core code to work. Only the GUI is different.

I phrased my question wrong. I mean, how can I change the settings of Gunbot on my Linux VPS?

For example, how can I adjust the EMA1/EMA2 settings?

If I choose a pair and use Bollinger Band, I can only modify the percentage for buy/sell of the Bollinger band.

And thanks for the explanation concerning the RAM.

19

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3.2 in less than 5 minutes (linux)

« on: June 19, 2017, 03:49:15 PM »

Thank you for this tutorial beer-k0in! I will support you with a tip.

Everything works fine and my Gunbot made his first trades.

Can you say me if there is a limit for Gunbot, or is it possible to trade ~40 pairs with 4GB RAM? And why do you say 2GB for ~17 pairs? Is it necessary to have a buffer? Because if one pair uses less than 100MB, it should be possible to trade ~20 pairs with 2GB, or not?

I also have another question. I haven't installed the Windows version because I prefer Linux, but are there any advantages for the Windows version? Maybe more settings or something like this?