Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jim

Pages: [1] 2
1
Technical Support & Development / Re: Gunbot log auto scroll down?
« on: November 21, 2017, 09:41:25 PM »
Copy paste to notepad ??

2
Technical Support & Development / gb xt making a manual sale ?
« on: November 16, 2017, 01:58:46 PM »
 using gb xt is there a process i need  to follow that will not confuse gb if i what to make a manual sale straight at the exchange   ?

3
General Discussion / Re: gb 6 memory usage ,,,,
« on: November 15, 2017, 01:35:05 AM »
my issue was my own fault i made a startup script that was not good it started gb over and over again

i got rid of the script and now running on a lynux vps 2gb running 11 pairs it is only using 7% of the ram

4
General Discussion / Re: gb 6 memory usage ,,,,
« on: November 13, 2017, 02:21:11 PM »
what OP system are you using ?

5
General Discussion / gb 6 memory usage ,,,,
« on: November 12, 2017, 12:41:33 PM »
GB 6 is maxing out 2gb memory on my vps is anyone else seeing high memory usage ?

cheers

6
Technical Support & Development / Re: Waiting to buy: price is too high!!!
« on: November 11, 2017, 08:17:34 AM »
I don't know what your strategy setting's are but considering the market in general I might well be glad about that !

7
Technical Support & Development / GB xt on lynux vps not reading .conf
« on: November 11, 2017, 01:25:41 AM »
I think gb is trying to run but it cant read the .conf file I had to put another } at the end to make the file validate and  I have tried changing the port from 5001 to 5000 but that does not help

 


0|gunthy-l | Detected config changes...
0|gunthy-l | Loading config...
0|gunthy-l | Unhandled rejection TypeError: Cannot read property 'port' of undefined
0|gunthy-l |     at new Websocket (/snapshot/gunbot-build/websocket.js:0:0)
0|gunthy-l |     at loadWS (/snapshot/gunbot-build/bot.lib.js:0:0)
0|gunthy-l |     at Bot.start.loadConfig.then (/snapshot/gunbot-build/bot.lib.js:0:0)
0|gunthy-l |     at tryCatcher (/snapshot/gunbot-build/node_modules/bluebird/js/release/util.js:16:23)
0|gunthy-l |     at Promise.module.exports.Promise._settlePromiseFromHandler (/snapshot/gunbot-build/node_modules/bluebird/js/release/promise.js:512:31)
0|gunthy-l |     at Promise.module.exports.Promise._settlePromise (/snapshot/gunbot-build/node_modules/bluebird/js/release/promise.js:569:18)
0|gunthy-l |     at Promise.module.exports.Promise._settlePromise0 (/snapshot/gunbot-build/node_modules/bluebird/js/release/promise.js:614:10)
0|gunthy-l |     at Promise.module.exports.Promise._settlePromises (/snapshot/gunbot-build/node_modules/bluebird/js/release/promise.js:693:18)
0|gunthy-l |     at Async._drainQueue (/snapshot/gunbot-build/node_modules/bluebird/js/release/async.js:133:16)
0|gunthy-l |     at Async._drainQueues (/snapshot/gunbot-build/node_modules/bluebird/js/release/async.js:143:10)
0|gunthy-l |     at Immediate.__dirname.Async.drainQueues (/snapshot/gunbot-build/node_modules/bluebird/js/release/async.js:17:14)
0|gunthy-l |     at runCallback (timers.js:800:20)
0|gunthy-l |     at tryOnImmediate (timers.js:762:5)
0|gunthy-l |     at processImmediate [as _immediateCallback] (timers.js:733:5)

this is the end of the .conf file

    "ws": {
        "port": 5001,
        "clientport": 3000,
        "hostname": "127.0.0.1"
    },
    "imap_listener": {
        "enabled": false,
        "authorized_froms": "[\"noreply@tradingview.com\"]",
        "user": "YOUR_EMAIL_HERE",
        "password": "YOUR_PASSWORD_HERE",
        "host": "imap.gmail.com",
        "port": 993,
        "tls": true,
        "tlsOptions": {
            "rejectUnauthorized": false
        }
    }
}
}

8
Technical Support & Development / Re: How do I install xt for a linux vps?
« on: November 08, 2017, 11:16:17 PM »
Someone to resolve this doubt, how can I install xt for a linux vps?

same as v5 i guess

9
Technical Support & Development / Re: License works on 3.3 but not on 5
« on: November 08, 2017, 10:04:27 AM »
My reseller was unable to do the v5 upgrade Guntha had to do it so message him too

10
Fine... I gave up. To use with polo with my existing key, may I get a link that works for the latest version?

This is what i used  it works i just watched it lol

https://github.com/GuntharDeNiro/Gunthy/releases

but if you have not yet used any v5 then you will need to get Gunthar to enable v5

many ppl still use v3 .... as stable version

11
>if you have sent your new key to gunthar all you have to do is wait

I don't think so.
AFAIK, changing yourself your marketplace is not allowed.

You've to FIRST sell your licence for the old marketplace, THEN buy a new one for the new marketplace (a second hand one is fine).

HTH -

Yeah sorry I was thinking for a second key for the same site !

12
Hello,

I switched crypto exchange platform from poloniex to bittrex. In order for my key to be updated I sent PM to gunthar. Should I take any other action to resolve this matter?

Thank you.

if you have sent your new key to gunthar all you have to do is wait
if you got your licence from an authorised reseller  then ask them they might be able to help faster

13
Technical Support & Development / pm2 logs in boxes ??
« on: November 05, 2017, 03:27:00 AM »
can anyone tell me why some pm2 logs are in boxes like this and some not ?

0|gunthy-l | ┌─────────────────┬──────────────────────────────────────┬──────────────┬────────┬─────────┬─────────────┬────────────┬──────────┐
0|gunthy-l | │ ɢƱͶʘŁ v5.0.5.5 │ LowBB                                │ HighBB       │ Buy at │ Last    │ USDT        │ ZEC        │ Pair     │
0|gunthy-l | ├─────────────────┼──────────────────────────────────────┼──────────────┼────────┼─────────┼─────────────┼────────────┼──────────┤
0|gunthy-l | │ Buy cycle       │ 228.65302796                         │ 232.32890580 │ 0      │ 228.944 │ 62.09574473 │ 0.00000000 │ USDT_ZEC │
0|gunthy-l | ├─────────────────┼──────────────────────────────────────┼──────────────┴────────┴─────────┴─────────────┴────────────┴──────────┤
0|gunthy-l | │ Callbacks       │ Waiting to buy: price is too high!!! │                                                                       │
0|gunthy-l | └─────────────────┴──────────────────────────────────────┴───────────────────────────────────────────────────────────────────────┘

14
Technical Support & Development / open order's ??
« on: November 05, 2017, 03:23:03 AM »
is this ment to mean that GB actually has open orders on the exchange if so then my GB 5.5 is getting stuck THINKING it has open order's

0|gunthy-l | 2017/11/04 23:00:22: Got Open Orders


15
Beginners & Help / Gb did not spend enough USDT
« on: November 03, 2017, 10:03:07 PM »
         },
         "USDT_***
                                        "TRADING_LIMIT": 5.0

so I asked GB to spend 5 USDT

But GB only spent   "0.00099946 USDT"  ,,,,,

is this just because of market conditions or am I missing something else that effects what GB spends ??

Edit my USDT balance was 70 USDT

16
Beginners & Help / Gunthy_v5055_RC Log file ?
« on: October 09, 2017, 02:24:25 PM »
where is the Log file for v5055_RC

and the defult settings for EMA are very different
            "EMA1": 24,
            "EMA2": 12,
do we put them back to
            "EMA1": 0.04,
            "EMA2": 0.08,

17
Beginners & Help / Re: BB settings
« on: October 09, 2017, 01:09:46 AM »
I haven' t bothered, but instead adjusted my settings to mimic the exchange BBs.

So are you saying that you changed GB settings so that these GB bb readings

[  Gunbot v3.3 Night Vision ------ ]
*****************************************************************************

Low Bollinger Band 0.00039857 High Bollinger Band 0.00047949
*****************************************************************************

read the same as the exchange bb lines ?



18
Technical Support & Development / Re: Help with stop loss
« on: October 08, 2017, 11:48:31 PM »
I guess you mean
"STOP_LIMIT": 60,
it means GB will autosell if the price drops 60% below what you paid

some people set this high some set it low

19
I used this guide it is by far the easiest to follow however when I got to here

$ pm2 start gunthy-linx64
please note that the above command will stop when you shut down the console.

13. To make Ubuntu run GUNBOT in the background, at all times, here are the key commands;
TO START THE BOT
$ pm2 start gunthy-linx64
TO STOP THE BOT
$ pm2 stop gunthy-linx64
TO MONITOR TRADES
$ pm2 MONIT
TO MONITOR LOGS
$ pm2 logs

Both the "start" commands are the same I do not see how one will keep the bot running and the other the bot will close when the terminal is closed ??
What happen to me was straight after I installed PM2 I was able to start and stop the bot
but
then I scrolled up a bit and noticed that PM2 was offering me the opportunity too do this

                Make pm2 auto-boot at server restart:

                $ pm2 startup

because it sounded like it would restart if my VPS rebooted I did it but then was unable to stop the bot because of this error

[PM2][ERROR] Permission denied, command needs to be runned as root - access file: /home/XXXXXXXXX/.pm2/rpc.sock

So I will reinstall and not run pm2 startup unless anyone can put any light on this

thanks



20
Maybe not related

   "strategies": {
      "bb": {
         "BUYLVL1": 1,
         "BUYLVL2": 1,
         "BUYLVL3": 1,
         "BUYLVL1": 0.6,
         "BUYLVL2": 2,
         "BUYLVL3": 70,

Pages: [1] 2