1
Technical Support & Development / Re: Gate.io
« on: March 08, 2021, 03:48:00 PM »
Any update on this issue? I'm having the same problem with V21.1.0.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Technical Support & Development / Re: Gunthy-ARM in V20?
« on: November 19, 2020, 03:36:27 PM »
Any update on this? It's been 2 weeks since I checked in and the build still isn't on GitHub.
If not, could you please post build instructions for gunthy-ARM on the wiki?
If not, could you please post build instructions for gunthy-ARM on the wiki?
3
Technical Support & Development / Gunthy-ARM in V20?
« on: November 02, 2020, 09:02:35 PM »
Glad to see the new release. I checked the repository: https://github.com/GuntharDeNiro/BTCT/releases/tag/2046
There's no arm.zip build like in v18.8?
Is ARM still supported in the new version?
There's no arm.zip build like in v18.8?
Is ARM still supported in the new version?
4
Beginners & Help / Re: Can Gunbot support trading on Uniswap or other Defi exchange?
« on: September 03, 2020, 11:23:10 PM »
Thanks. I'm not complaining with my choices for exchanges. 
The cost of gas these days would eat up a lot of profit on UniSwap anyway.
The cost of gas these days would eat up a lot of profit on UniSwap anyway.
5
Beginners & Help / Can Gunbot support trading on Uniswap or other Defi exchange?
« on: September 02, 2020, 09:22:40 PM »
With Uniswap suddenly surpassing Coinbase Pro in volume, is there a way to get Gunbot to trade there?
6
Technical Support & Development / Re: TradingView add on: Can limit sell orders be placed with a rate?
« on: August 29, 2020, 08:47:17 PM »
Thanks Aitor. This is what I've been doing with the market orders turned off.
If the market is moving down quickly, a sell limit may never fill.
I can see a use case where someone would want to set a sell limit price at say 99.8% of the last offer price. This way at least some of the order would fill if the market is crashing. This is important on smaller exchanges where a large market order may consume a large fraction of the order book.
If the market is moving down quickly, a sell limit may never fill.
I can see a use case where someone would want to set a sell limit price at say 99.8% of the last offer price. This way at least some of the order would fill if the market is crashing. This is important on smaller exchanges where a large market order may consume a large fraction of the order book.
7
Technical Support & Development / Re: TradingView add on: Can limit sell orders be placed with a rate?
« on: August 29, 2020, 05:50:02 AM »
Thanks for the reply. My interest is more in making a limit sell order at a specified rate rather than selling some fraction of a lot I own.
For currencies with low volume on an exchange, a market sell order could drive down the price. The market orders also have higher commissions. If I could place a limit sell order, that could allow time for the small market to sync up with the global price.
If this can't be done with the existing command set, I would like to request this feature be added to future versions.
Thanks !
For currencies with low volume on an exchange, a market sell order could drive down the price. The market orders also have higher commissions. If I could place a limit sell order, that could allow time for the small market to sync up with the global price.
If this can't be done with the existing command set, I would like to request this feature be added to future versions.
Thanks !
8
Technical Support & Development / TradingView add on: Can limit sell orders be placed with a rate?
« on: August 28, 2020, 04:55:17 PM »
On the wiki, the BUY command allows for setting a rate:
BUY_EXCHANGE_USDT-BTC_amount_rate
Is there a reason why there is not a corresponding command format for sell limit orders such as (SELL_EXCHANGE_USDT-BTC_amount_rate)?
BUY_EXCHANGE_USDT-BTC_amount_rate
Is there a reason why there is not a corresponding command format for sell limit orders such as (SELL_EXCHANGE_USDT-BTC_amount_rate)?
9
Technical Support & Development / Re: Can't use TradingView Add-On when adding Coinbase Pro exchange
« on: August 12, 2020, 07:23:46 AM »
I got help from Javier today since Aitor was out sick. It turn out, I did not have a trading pair set up with the second exchange, Coinbasepro.
A trading pair must be set up for each exchange. I added one an have tested that the TV add on works on both exchanges.
Thank Javier and get well soon Aitor!
A trading pair must be set up for each exchange. I added one an have tested that the TV add on works on both exchanges.
Thank Javier and get well soon Aitor!
10
Technical Support & Development / Re: Can't use TradingView Add-On when adding Coinbase Pro exchange
« on: August 09, 2020, 09:23:03 PM »
There are 3 places where a user references an exchange: TradingView command, 'Exchanges' settings page, and 'Swap Exchanges' settings page.
I changed both references from 'coinbasepro' to 'gdax' in the 'Exchanges' and 'Swap Exchanges' settings pages.
I changed the TradingView alert to be 'BUY_GDAX_BTC-XTZ_0.002'
I get a new error now.
The IMAP listener picks up the message: BUY_GDAX_BTC-XTZ_0.002
The log shows:
Note: The log does not show the loading exchange for Coinbase Pro or GDAX
What am I doing wrong with the setup?
I changed both references from 'coinbasepro' to 'gdax' in the 'Exchanges' and 'Swap Exchanges' settings pages.
I changed the TradingView alert to be 'BUY_GDAX_BTC-XTZ_0.002'
I get a new error now.
The IMAP listener picks up the message: BUY_GDAX_BTC-XTZ_0.002
The log shows:
Code: [Select]
Your registered exchanges:
BINANCE: my_key
BINANCEUS: my_key
GDAX: my_key
Loading exchange - binanceus
Loading data....
------------------------------------------------------------------------------------------------
ɢՍΠβõŦ TradingView Edition v18.8.8 - Waiting for alerts...2020/08/09 12:41:13
------------------------------------------------------------------------------------------------
Nothing to fetch
Nothing to fetch
Nothing to fetch
Nothing to fetch
Nothing to fetch
Nothing to fetch
Nothing to fetch
emailParsed { timestamp: 1597002090770,
type: 'buy',
pair: 'BTC-XTZ',
price: undefined,
exchange: 'gdax',
tl: '0.002' }
TypeError: Cannot read property 'needLock' of undefined
at v9b (/snapshot/pi/Desktop/gb/bot.gunbot.js:0:0)
at Timeout.setInterval [as _onTimeout] (/snapshot/pi/Desktop/gb/bot.gunbot.js:0:0)
at ontimeout (timers.js:478:11)
at tryOnTimeout (timers.js:302:5)
at Timer.listOnTimeout (timers.js:262:5) 'Uncaught Exception thrown'
Loading config...
info - socket.io started
Note: The log does not show the loading exchange for Coinbase Pro or GDAX
What am I doing wrong with the setup?
11
Technical Support & Development / Re: Can't use TradingView Add-On when adding Coinbase Pro exchange
« on: August 09, 2020, 07:40:46 PM »
I see that Coinbase Pro is linked to 'gdax' on the wiki: https://wiki.gunthy.org/about/supported-exchanges
My confusion came from the web interface under the Swap Exchanges page where both 'coinbasepro' and 'gdax' are listed as exchange options.
My confusion came from the web interface under the Swap Exchanges page where both 'coinbasepro' and 'gdax' are listed as exchange options.
12
Technical Support & Development / Re: Can't use TradingView Add-On when adding Coinbase Pro exchange
« on: August 09, 2020, 05:48:51 PM »
Many thanks for the reply!
13
Technical Support & Development / Can't use TradingView Add-On when adding Coinbase Pro exchange
« on: August 01, 2020, 07:08:34 PM »
I'm trying to use the Gunbot TradingView Add-On to trade on both Binance.US and Coinbase Pro.
Gunbot works great on Binance.US by itself and with Binance.
I tried adding Coinbase Pro (coinbasepro) to the list, and my trades did not get processed.
I've added public and private keys to both exchanges in the GUI.
I've also registered both on the 'Swap Exchanges' page.
I added a second trading pair for Coinbase Pro as well.
When Gunbot starts, it encounters and error and restarts. The console shows the following error:
On the Swap Licensced Exchanges, I see that it's possible to register 'coinbasepro' and 'gdax' (the former name of the Coinbase Pro exchange).
On the wiki page https://wiki.gunthy.org/about/supported-exchanges , Coinbase Pro is listed as a supported exchange with config_name of 'gdax'.
Does this have something to do with it?
Gunbot works great on Binance.US by itself and with Binance.
I tried adding Coinbase Pro (coinbasepro) to the list, and my trades did not get processed.
I've added public and private keys to both exchanges in the GUI.
I've also registered both on the 'Swap Exchanges' page.
I added a second trading pair for Coinbase Pro as well.
When Gunbot starts, it encounters and error and restarts. The console shows the following error:
Code: [Select]
Your Gunthy token balance is: 2500 in wallet: my_gunthy_wallet
Your license type is: V12 - ULTIMATE
Tradingview Plugin Access: true
Market Maker Plugin Access: false
Your user rank: 100
You can have up to 5 exchanges to run simultaneously
Your registered exchanges:
BINANCE: my_public_key
BINANCEUS: my_public_key
COINBASEPRO: my_public_key
Loading exchange - binanceus
Loading exchange - coinbasepro
TypeError: undefined is not a constructor
at new H6 (/snapshot/pi/Desktop/gb/ctx-wrapper.js:0:0)
at _.(anonymous function) (/snapshot/pi/Desktop/gb/bot.gunbot.js:0:0)
at isBind (/snapshot/pi/Desktop/gb/node_modules/lodash/lodash.js:4911:15)
at baseForOwn (/snapshot/pi/Desktop/gb/node_modules/lodash/lodash.js:2996:24)
at index (/snapshot/pi/Desktop/gb/node_modules/lodash/lodash.js:4880:18)
at Function.forEach (/snapshot/pi/Desktop/gb/node_modules/lodash/lodash.js:9344:14)
at h9b (/snapshot/pi/Desktop/gb/bot.gunbot.js:0:0)
at Bot.start.G9b (/snapshot/pi/Desktop/gb/bot.gunbot.js:0:0)
at tryCatcher (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/util.js:16:23)
at Promise.module.exports.Promise._settlePromiseFromHandler (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/promise.js:512:31)
at Promise.module.exports.Promise._settlePromise (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/promise.js:569:18)
at Promise.module.exports.Promise._settlePromise0 (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/promise.js:614:10)
at Promise.module.exports.Promise._settlePromises (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/promise.js:694:18)
at _drainQueueStep (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/async.js:138:12)
at _drainQueue (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/async.js:131:9)
at Async._drainQueues (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/async.js:147:5)
at Immediate.__dirname.Async.drainQueues [as _onImmediate] (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/async.js:17:14)
at runCallback (timers.js:800:20)
at tryOnImmediate (timers.js:762:5)
at processImmediate [as _immediateCallback] (timers.js:733:5) 'Unhandled Rejection at Promise' Promise {
_bitField: 18087936,
_fulfillmentHandler0: TypeError: undefined is not a constructor
at new H6 (/snapshot/pi/Desktop/gb/ctx-wrapper.js:0:0)
at _.(anonymous function) (/snapshot/pi/Desktop/gb/bot.gunbot.js:0:0)
at isBind (/snapshot/pi/Desktop/gb/node_modules/lodash/lodash.js:4911:15)
at baseForOwn (/snapshot/pi/Desktop/gb/node_modules/lodash/lodash.js:2996:24)
at index (/snapshot/pi/Desktop/gb/node_modules/lodash/lodash.js:4880:18)
at Function.forEach (/snapshot/pi/Desktop/gb/node_modules/lodash/lodash.js:9344:14)
at h9b (/snapshot/pi/Desktop/gb/bot.gunbot.js:0:0)
at Bot.start.G9b (/snapshot/pi/Desktop/gb/bot.gunbot.js:0:0)
at tryCatcher (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/util.js:16:23)
at Promise.module.exports.Promise._settlePromiseFromHandler (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/promise.js:512:31)
at Promise.module.exports.Promise._settlePromise (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/promise.js:569:18)
at Promise.module.exports.Promise._settlePromise0 (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/promise.js:614:10)
at Promise.module.exports.Promise._settlePromises (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/promise.js:694:18)
at _drainQueueStep (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/async.js:138:12)
at _drainQueue (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/async.js:131:9)
at Async._drainQueues (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/async.js:147:5)
at Immediate.__dirname.Async.drainQueues [as _onImmediate] (/snapshot/pi/Desktop/gb/node_modules/bluebird/js/release/async.js:17:14)
at runCallback (timers.js:800:20)
at tryOnImmediate (timers.js:762:5)
at processImmediate [as _immediateCallback] (timers.js:733:5),
_rejectionHandler0: undefined,
_promise0: undefined,
_receiver0: undefined }
Loading config...
info - socket.io started
GUI Server Deployed: http://localhost:5000
On the Swap Licensced Exchanges, I see that it's possible to register 'coinbasepro' and 'gdax' (the former name of the Coinbase Pro exchange).
On the wiki page https://wiki.gunthy.org/about/supported-exchanges , Coinbase Pro is listed as a supported exchange with config_name of 'gdax'.
Does this have something to do with it?
14
Technical Support & Development / Re: GB won't sell USD-LINK with TradingView Add-On, works fine with BTC, ETH, XTZ
« on: June 22, 2020, 08:40:10 PM »
A friend just ran into a similar issue with USD-ETH. Here is a copy of his sell on the console:
I believe he had a balance on BinanceUS with 2.6 digits and the order was sent in 2.5 digits.
Code: [Select]
ɢՍҊɮǾŁ TradingView Edition - Waiting for alerts...
emailParsed { timestamp: 1592854085629,
type: 'sell',
tl: undefined,
pair: 'USD-ETH',
exchange: 'binanceus',
price: undefined }
2020/06/22 12:28:07: Looking for pending orders...
ɢՍҊɮǾŁ TradingView Edition - Waiting for alerts...
2020/06/22 12:28:08: Checking prices...
2020/06/22 12:28:09: Received a sell order...
[ minSize: undefined,
precision: { base: 8, quote: 4, amount: 5, price: 2 } ]
Original price: 242.34
Original volume: 11.07187
Sell Order Opts: { pair: 'ETH/USD',
type: 'SELL',
price: 242.34,
amount: '11.07187' }
{}
┌────────────────────┬────────────────────┬───────────┬─────────────┬─────────────┬─────────────────┐
│ ɢƱŋßʘŦ RT Edition │ Version │ Exchange │ Pair │ Cycle │ │
├────────────────────┼────────────────────┼───────────┼─────────────┼─────────────┤ │
│ TradingView Plugin │ v18.8.8 │ binanceus │ USD-ETH │ SELL │ │
├────────────────────┼────────────────────┼───────────┼─────────────┼─────────────┼─────────────────┤
│ │ Ask │ Bid │ Balance USD │ Balance ETH │ BreakEven Point │
├────────────────────┼────────────────────┼───────────┼─────────────┼─────────────┼─────────────────┤
│ │ 242.34 │ 242.89 │ 367.7741 │ 11.071868 │ │
├────────────────────┼────────────────────┼───────────┴─────────────┴─────────────┴─────────────────┤
│ Callback │ SELL order placed │ │
└────────────────────┴────────────────────┴─────────────────────────────────────────────────────────┘
------------------------------------------------------------------------------------------------
ɢՍÑɮõŦ TradingView Edition - Waiting for alerts...2020/06/22 12:28:09
------------------------------------------------------------------------------------------------
ɢՍҊɮǾŁ TradingView Edition - Waiting for alerts...
ɢՍҊɮǾŁ TradingView Edition - Waiting for alerts...I believe he had a balance on BinanceUS with 2.6 digits and the order was sent in 2.5 digits.
15
Technical Support & Development / Re: GB won't sell USD-LINK with TradingView Add-On, works fine with BTC, ETH, XTZ
« on: June 12, 2020, 07:24:53 PM »
Thank you for your speedy reply. I'll get it at the next release.
16
Technical Support & Development / GB won't sell USD-LINK with TradingView Add-On, works fine with BTC, ETH, XTZ
« on: June 11, 2020, 04:06:57 PM »
I hope someone can help me with this issue.
I've set up alerts for my strategy in TradingView and am trading 5 pairs: USD-BTC, USD-ETH, USD-XTZ, USD-ADA, and USD-LINK
I've tested each alert by making the condition true. Orders are received in my IMAP acct. Gunbot reads and parses the emails and the console descriptions appear similar:
Failed LINK Sell:
Successful ADA Sell:
One difference I see is that after the line "Sell Order Opts: { pair: ...", the ADA sell had a long description about the execution. The Link sell only had "{}"
I wonder if the word LINK is a command that is not being parsed properly as such?
Has anyone else had this issue?
I've set up alerts for my strategy in TradingView and am trading 5 pairs: USD-BTC, USD-ETH, USD-XTZ, USD-ADA, and USD-LINK
I've tested each alert by making the condition true. Orders are received in my IMAP acct. Gunbot reads and parses the emails and the console descriptions appear similar:
Failed LINK Sell:
Code: [Select]
Nothing to fetch
emailParsed { timestamp: 1591833875838,
type: 'sell',
pair: 'USD-LINK',
price: undefined,
exchange: 'binanceus',
tl: undefined }
2020/06/10 17:04:36: Looking for pending orders...
2020/06/10 17:04:36: Checking prices...
2020/06/10 17:04:37: Received a sell order...
Nothing to fetch
[ minSize: undefined,
precision: { base: 8, quote: 4, amount: 2, price: 4 } ]
Original price: 4.4212
Original volume: 11.32
Sell Order Opts: { pair: 'LINK/USD', type: 'SELL', price: 4.4212, amount: '11.32' }
{}
┌────────────────────┬────────────────────┬───────────┬─────────────┬──────────────┬─────────────────┐
│ ɢՍƝ฿Ǿͳ RT Edition │ Version │ Exchange │ Pair │ Cycle │ │
├────────────────────┼────────────────────┼───────────┼─────────────┼──────────────┤ │
│ TradingView Plugin │ v18.8.8 │ binanceus │ USD-LINK │ SELL │ │
├────────────────────┼────────────────────┼───────────┼─────────────┼──────────────┼─────────────────┤
│ │ Ask │ Bid │ Balance USD │ Balance LINK │ BreakEven Point │
├────────────────────┼────────────────────┼───────────┼─────────────┼──────────────┼─────────────────┤
│ │ 4.4212 │ 4.43 │ 28182.303 │ 11.31837 │ │
├────────────────────┼────────────────────┼───────────┴─────────────┴──────────────┴─────────────────┤
│ Callback │ SELL order placed │ │
└────────────────────┴────────────────────┴──────────────────────────────────────────────────────────┘
------------------------------------------------------------------------------------------------
ɢƱͶƁםŁ TradingView Edition - Waiting for alerts...2020/06/10 17:04:38
------------------------------------------------------------------------------------------------
Nothing to fetch
Nothing to fetchSuccessful ADA Sell:
Code: [Select]
Nothing to fetch
emailParsed { timestamp: 1591833513591,
type: 'sell',
pair: 'USD-ADA',
price: undefined,
exchange: 'binanceus',
tl: undefined }
2020/06/10 16:58:34: Looking for pending orders...
2020/06/10 16:58:34: Checking prices...
2020/06/10 16:58:35: Received a sell order...
Nothing to fetch
[ minSize: undefined,
precision: { base: 8, quote: 4, amount: 1, price: 4 } ]
Original price: 0.0836
Original volume: 598.8
Sell Order Opts: { pair: 'ADA/USD', type: 'SELL', price: 0.0836, amount: '598.8' }
{ info:
{ symbol: 'ADAUSD',
orderId: 13887177,
orderListId: -1,
clientOrderId: 'x-BCU53SPJeg7m5kwwefrkfpjc1z4ut',
transactTime: 1591833515853,
price: '0.0000',
origQty: '598.80000000',
executedQty: '598.80000000',
cummulativeQuoteQty: '50.0596',
status: 'FILLED',
timeInForce: 'GTC',
type: 'MARKET',
side: 'SELL',
fills: [ [Object] ] },
id: '13887177',
timestamp: 1591833515853,
datetime: '2020-06-10T23:58:35.853Z',
lastTradeTimestamp: undefined,
symbol: 'ADA/USD',
type: 'market',
side: 'sell',
price: 0.08359986639946561,
amount: 598.8,
cost: 50.05967999999999,
average: 0.0836,
filled: 598.8,
remaining: 0,
status: 'closed',
fee: { cost: 0.00215446, currency: 'BNB' },
trades:
[ { info: [Object],
timestamp: undefined,
datetime: undefined,
symbol: 'ADA/USD',
id: undefined,
order: undefined,
type: undefined,
takerOrMaker: undefined,
side: undefined,
price: 0.0836,
amount: 598.8,
cost: 50.05967999999999,
fee: [Object] } ] }
┌────────────────────┬────────────────────┬───────────┬─────────────┬─────────────┬─────────────────┐
│ ɢՍÑɃםŦ RT Edition │ Version │ Exchange │ Pair │ Cycle │ │
├────────────────────┼────────────────────┼───────────┼─────────────┼─────────────┤ │
│ TradingView Plugin │ v18.8.8 │ binanceus │ USD-ADA │ SELL │ │
├────────────────────┼────────────────────┼───────────┼─────────────┼─────────────┼─────────────────┤
│ │ Ask │ Bid │ Balance USD │ Balance ADA │ BreakEven Point │
├────────────────────┼────────────────────┼───────────┼─────────────┼─────────────┼─────────────────┤
│ │ 0.0836 │ 0.0837 │ 28182.3478 │ 598.8 │ │
├────────────────────┼────────────────────┼───────────┴─────────────┴─────────────┴─────────────────┤
│ Callback │ SELL order placed │ │
└────────────────────┴────────────────────┴─────────────────────────────────────────────────────────┘
------------------------------------------------------------------------------------------------
ɢՍÑƁǾŁ TradingView Edition - Waiting for alerts...2020/06/10 16:58:36
------------------------------------------------------------------------------------------------
Nothing to fetch
Nothing to fetchOne difference I see is that after the line "Sell Order Opts: { pair: ...", the ADA sell had a long description about the execution. The Link sell only had "{}"
I wonder if the word LINK is a command that is not being parsed properly as such?
Has anyone else had this issue?
17
Technical Support & Development / TradingView add on question: How to cancel a limit order?
« on: June 05, 2020, 02:05:18 AM »
From the wiki page (https://wiki.gunthy.org/setup-and-general-settings/preferences/tradingview-add-on), I understand that a limit buy order can be placed using the syntax:
BUY_EXCHANGE_USDT-BTC_amount_rate
I assume that would be a maker order on the exchange's books that would fill only when the price drops to the specified rate.
Is it possible for TradingView to issue an alert that cancels that limit order so a new limit buy order can be placed with a different rate?
BUY_EXCHANGE_USDT-BTC_amount_rate
I assume that would be a maker order on the exchange's books that would fill only when the price drops to the specified rate.
Is it possible for TradingView to issue an alert that cancels that limit order so a new limit buy order can be placed with a different rate?
18
Technical Support & Development / Tradingview Feature Request: BUY_exchange_USDT-BTC_0.25ACCOUNT
« on: April 10, 2020, 04:18:06 PM »
I've been using Gunbot for about a year and a half with the Tradingview. I usually trade about 4 types of crypto based on strategies I develop and test in Tradingview.
I have one account on an exchange and I would like to be able to have my trades automatically entered for some percentage of my account value.
For example, if I have all my money, say $10K, in USDT, when an alert is triggered, I would like to be able to set a buy order to purchase BTC with 25% of the account value.
BUY_exchange_USDT-BTC_0.25ACCOUNT
The current version allows for a fixed price order (e.g. BUY_exchange_USDT-BTC_2500)
Using a relative account value would allow me to run my strategy for all 4 coins and not have to continually adjust the order amount as the account value fluctuates.
If there isn't enough USDT in the account to purchase the order, an order should be placed to use all the available USDT.
Is it possible to implement this in the current version of Gunbot?
Cheers!
I have one account on an exchange and I would like to be able to have my trades automatically entered for some percentage of my account value.
For example, if I have all my money, say $10K, in USDT, when an alert is triggered, I would like to be able to set a buy order to purchase BTC with 25% of the account value.
BUY_exchange_USDT-BTC_0.25ACCOUNT
The current version allows for a fixed price order (e.g. BUY_exchange_USDT-BTC_2500)
Using a relative account value would allow me to run my strategy for all 4 coins and not have to continually adjust the order amount as the account value fluctuates.
If there isn't enough USDT in the account to purchase the order, an order should be placed to use all the available USDT.
Is it possible to implement this in the current version of Gunbot?
Cheers!
Pages: [1]