Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - victoryu

Pages: [1]
1
Technical Support & Development / Re: errorHandler (C:\snapshot\Gunbot-master\ctx-wrapper.js:0:0)
« on: January 04, 2018, 11:52:14 AM »
I think I figured out what the issue is.  I tried using Gunbot 7.0.1, and got the error message, Error: MIN_TRADE_REQUIREMENT_NOT_MET.  After doing some research, it looked to me that MIN_TRADE_REQUIREMENT_NOT_MET means that the buy order didn't meet Bittrex's minimum trading requirement of 0.001 BTC. 

Each Gunbot strategy has the parameter TRADING_LIMIT with default value 0.001.  So if I'm trading ETH-XLM pair, and the price of Lumen in Ethereum is 0.00094 ETH/XLM, then Gunbot could buy at most (0.001 ETH) / (0.00094 ETH/XLM), which is around 1.063830 XLM.  Given the price of of Lumen in Bitcoin is 0.00005910 BTC/XLM, 1.063830 XLM is about (0.00005910 BTC/XLM) * (1.063830 XLM) = 0.000062872 BTC, which is less than Bittrex's minimum trade requirement of 0.001 BTC.

I changed the value of the TRADING_LIMIT parameter from 0.001 to 0.15 for bbstepgain strategy.  In this case, Gunbot could buy at most (0.15 ETH) / (0.00094 ETH/XLM), which is around 159.57447 XML, which is about (0.00005910 BTC/XLM) * (159.57447 XML) ~ 0.009431 BTC, greater than Bittrex's minimum trading requirement of 0.001 BTC.

After the TRADING_LIMIT value was updated, Gunbot was able to place a buy order, and the order was completed in Bittrex.  Thanks!

Error: MIN_TRADE_REQUIREMENT_NOT_MET
    at errorHandler (C:\snapshot\Gunbot-master\ctx-wrapper.js:0:0)
    at <anonymous>
    at process._tickCallback (internal/process/next_tick.js:169:7)

2
Technical Support & Development / Re: Help: Generic Errors on 7.0.2 on about 30% of my Pairs
« on: January 04, 2018, 11:51:50 AM »
I think I figured out what the issue is.  I tried using Gunbot 7.0.1, and got the error message, Error: MIN_TRADE_REQUIREMENT_NOT_MET.  After doing some research, it looked to me that MIN_TRADE_REQUIREMENT_NOT_MET means that the buy order didn't meet Bittrex's minimum trading requirement of 0.001 BTC. 

Each Gunbot strategy has the parameter TRADING_LIMIT with default value 0.001.  So if I'm trading ETH-XLM pair, and the price of Lumen in Ethereum is 0.00094 ETH/XLM, then Gunbot could buy at most (0.001 ETH) / (0.00094 ETH/XLM), which is around 1.063830 XLM.  Given the price of of Lumen in Bitcoin is 0.00005910 BTC/XLM, 1.063830 XLM is about (0.00005910 BTC/XLM) * (1.063830 XLM) = 0.000062872 BTC, which is less than Bittrex's minimum trade requirement of 0.001 BTC.

I changed the value of the TRADING_LIMIT parameter from 0.001 to 0.15 for bbstepgain strategy.  In this case, Gunbot could buy at most (0.15 ETH) / (0.00094 ETH/XLM), which is around 159.57447 XML, which is about (0.00005910 BTC/XLM) * (159.57447 XML) ~ 0.009431 BTC, greater than Bittrex's minimum trading requirement of 0.001 BTC.

After the TRADING_LIMIT value was updated, Gunbot was able to place a buy order, and the order was completed in Bittrex.  Thanks!

Error: MIN_TRADE_REQUIREMENT_NOT_MET
    at errorHandler (C:\snapshot\Gunbot-master\ctx-wrapper.js:0:0)
    at <anonymous>
    at process._tickCallback (internal/process/next_tick.js:169:7)

3
Technical Support & Development / Re: Buy Orders on Bittrex with Gunbot
« on: January 04, 2018, 11:50:52 AM »
I think I figured out what the issue is.  I tried using Gunbot 7.0.1, and got the error message, Error: MIN_TRADE_REQUIREMENT_NOT_MET.  After doing some research, it looked to me that MIN_TRADE_REQUIREMENT_NOT_MET means that the buy order didn't meet Bittrex's minimum trading requirement of 0.001 BTC. 

Each Gunbot strategy has the parameter TRADING_LIMIT with default value 0.001.  So if I'm trading ETH-XLM pair, and the price of Lumen in Ethereum is 0.00094 ETH/XLM, then Gunbot could buy at most (0.001 ETH) / (0.00094 ETH/XLM), which is around 1.063830 XLM.  Given the price of of Lumen in Bitcoin is 0.00005910 BTC/XLM, 1.063830 XLM is about (0.00005910 BTC/XLM) * (1.063830 XLM) = 0.000062872 BTC, which is less than Bittrex's minimum trade requirement of 0.001 BTC.

I changed the value of the TRADING_LIMIT parameter from 0.001 to 0.15 for bbstepgain strategy.  In this case, Gunbot could buy at most (0.15 ETH) / (0.00094 ETH/XLM), which is around 159.57447 XML, which is about (0.00005910 BTC/XLM) * (159.57447 XML) ~ 0.009431 BTC, greater than Bittrex's minimum trading requirement of 0.001 BTC.

After the TRADING_LIMIT value was updated, Gunbot was able to place a buy order, and the order was completed in Bittrex.  Thanks!

Error: MIN_TRADE_REQUIREMENT_NOT_MET
    at errorHandler (C:\snapshot\Gunbot-master\ctx-wrapper.js:0:0)
    at <anonymous>
    at process._tickCallback (internal/process/next_tick.js:169:7)

4
Technical Support & Development / Buy Orders on Bittrex with Gunbot
« on: January 04, 2018, 01:37:07 AM »
Hello,

Has anyone been able to place buy orders with Gunbot XT Edition or Gunbot in general?  It looks like there is some issue with placing buy order with Gunbot XT Edition.  First it's waiting to trade.  After timeout is over, the error occurs.  Thanks!

GBXT_v7.0.2 ETH-XLM Round # 4
------------------------------------------------------------------------------------------------
 ɢՍͶ฿Ǿͳ XT Edition  Scanning bittrex for trading opportunities 2018/01/03 20:04:02
------------------------------------------------------------------------------------------------
Last trade P/L for ETH-XLM was: 0.000 %
************************************************************************************************
Waiting to trade...Safety Switch is on...
************************************************************************************************

GBXT_v7.0.2 ETH-XLM Round # 5
------------------------------------------------------------------------------------------------
 ɢՍҊɃøͳ XT Edition  Scanning bittrex for trading opportunities 2018/01/03 20:04:16
------------------------------------------------------------------------------------------------
Last trade P/L for ETH-XLM was: 0.000 %
Error: [object Object]
    at errorHandler (C:\snapshot\Gunbot-master\ctx-wrapper.js:0:0)
    at
    at process._tickCallback (internal/process/next_tick.js:169:7)

5
Technical Support & Development / Re: Help: Generic Errors on 7.0.2 on about 30% of my Pairs
« on: January 04, 2018, 12:59:25 AM »
Looks like the error happens when Gunbot is trying to place a buy order. 

6
Technical Support & Development / Re: Help: Generic Errors on 7.0.2 on about 30% of my Pairs
« on: January 03, 2018, 10:53:50 PM »
For bbstepgain strategy, it looks like the program throws error only when the Core checks value for Can we Buy is Yes.  Hopefully Gunthar can provide more insight on this issue.

7
Technical Support & Development / Re: Help: Generic Errors on 7.0.2 on about 30% of my Pairs
« on: January 03, 2018, 10:36:34 PM »
Was also running Bittrex, and the Gunbot was trading ETH-XRP and ETH-XLM pairs, using emotionless and  bbstepgain strategies, when getting that error.

8
Technical Support & Development / Re: Help: Generic Errors on 7.0.2 on about 30% of my Pairs
« on: January 03, 2018, 10:23:46 PM »
I'm getting this error too.

Last trade P/L for ETH-XLM was: 0.000 %
Error: [object Object]
    at errorHandler (C:\snapshot\Gunbot-master\ctx-wrapper.js:0:0)
    at
    at process._tickCallback (internal/process/next_tick.js:169:7)

9
Technical Support & Development / errorHandler (C:\snapshot\Gunbot-master\ctx-wrapper.js:0:0)
« on: January 03, 2018, 09:54:23 PM »
Hello,

Does anyone know what might be causing the following error?  It occurs in Logs, but not in Errors.  Thanks!

Error: [object Object]
    at errorHandler (C:\snapshot\Gunbot-master\ctx-wrapper.js:0:0)
    at <anonymous>
    at process._tickCallback (internal/process/next_tick.js:169:7)

10
Technical Support & Development / Re: (node:3952) UnhandledPromiseRejectionWarning: Unhandled promise rejection
« on: January 02, 2018, 11:32:55 PM »
Enabled READ INFO, TRADE LIMIT, and TRADE MARKET for my API key in Bittrex, and that seems to resolve the issue.  Thanks!

11
Technical Support & Development / (node:3952) UnhandledPromiseRejectionWarning: Unhandled promise rejection
« on: January 02, 2018, 10:45:19 PM »
Hello,

I'm getting the following in Logs:

Loading config...
Loading exchange - bittrex


and the following in Errors:

(node:3952) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 1): Error: [object Object]
(node:3952) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js process with a non-zero exit code.


Does anyone happen to know what's causing the issue and how to resolve it?  Thank you!


Pages: [1]