Messages

1

General Discussion / New Exchange - UpCoin

« on: April 10, 2018, 11:46:54 PM »

Hello,

they is a new exchange......

it is in beta atm, but till now it looks very nice !

they want to offer 1300 pairs !!!!!

and only have 0,1 - 0,2% fees (one trade = 0,3%)

that all sounds very nice for botting, i think (;

maybe it is interesting for GB in the future ?!


here is my ref-link, maybe somebody else is interested ?!

https://upcoin.com/?ID=37737b92

2

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: March 12, 2018, 10:14:27 PM »

auto buy BNB feature !

i like to suggest, that GB should auto buy new BNB (for fee) on binance, if the BNB amount is to low......

something like that:

if BNB under X buy Y new BNB

3

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: February 27, 2018, 04:04:53 PM »

if that possible, a kind of "pump & dump" protection where very nice.......

for example, if the coin goes to high, in a to short time, than better wait with buying.....

but the pump cann use for make big gains, becouse of selling on the top (;
but a rebuy will end in a bag ):

maybe it is possible, to check, how far away the price is, from the MA.......
if the price is to fast, to high above the MA, then it is maybe a risk to buy, becouse it is possible, that the price will dump soon....
so GB can wait....


of course it is better, to dont trade this pairs, but there is no list wich pairs are typical "pump & dump" pairs ?

4

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: February 22, 2018, 06:59:10 PM »

and it would be very nice, if you can choose/import the config with oder names (in the GUI)......

and/or if the settings get saved in the configfile....

becouse i have two configfiles (bearish, bullish) and to import they in the GUI, i have to change the name, import and rename......

5

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: February 21, 2018, 07:46:15 PM »

i really like to the a other way of trailling sell/buy, too.......

maybe the stop gets automatical closer, if the price gets higher.......
becouse the risk, that the price go down is higher.....


and i really like a possibility, to set prices (or %) for stop-loss and a min. sell- value....

becouse i use GB to trade telegram-signals....

and you often get prices and not %.

i have write a little calculator via excel, but it is much of work to calculate the %, if you use GB to buy, too for the telegram-signals....

so a feature, like a min.-sell price is very helpfull, becouse this is the price, under that GB dont sell and above this GB use the strategy, to get an better price (;

it make to sense for the normal usage of GB, but so GB is more flexible and you can use it, to support you own trading by signals or analysis.

and a direct.-buy-price would be very nice, too.... that mean, this is the price for that GB buy direct, otherwise GB tray to get an lower price..... that is very helpfull for trading via signals, too.....

i like to combinate the free telegram signals and GB, becouse till know, it work better for me, like only GB (;


and a feature, like the markettrender would be amazing or a auto-switch for the config, so that GB look for the upper trend (in a bigger timeframe) and use that for changing the config for bearish or bullish.


and a error-notification via email or telegram would be very, very helpfull, becouse GB often stop the work, becouse of errors and i dont see it and so i missed trades and so on.....
or for example, one pair on bittrex dont work and GB start new and ignore the pairs, after this pair..... it would be great, if GB simply skip this pair and send an notification.


with every version GB is getting greater and greater (:
iam exicedly about the new version (:

6

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: January 21, 2018, 09:58:29 PM »

another suggestion........


my problem atm is, that i have not much balance....and i often add to much pairs and all ends in bags ..........

now i have calculated how much btc are needet for one pair,

if i run GB with the min. amount to trade(exchange) and with my DU setting.

so i can (for example) run 10 pairs with my balance X.

but maybe it takes a time, till the pairs give a trading possibility.....

if i add for example 20 pairs, than the probability is higher, that the next trading possibility comes faster, but it maybe happen, that every pair give a trading possibility and GB take the btc, that i maybe need for DU the other pairs.

so my idea is, to add all you pairs you want, but say GB "only trade 10 pairs out of this pool".

that mean, GB trades only the first 10 pairs, that give a trading possibility and than "ignore" the other pairs till the next sell circle is over and than waiting for the next pair out off the "pool" that give a trading possibility and so on.....


another idea is, to programm, that GB reserve the hole btc, that he need to DU the pair, so that this btc dont used for another pair.......


so GB automatical trade this pair, that at first give a trading possibility, but without losing the btc, you need in the case of DU and you can add all pairs, you want.......

it is maybe possible to do it by hand, maybe with "FUNDS_RESERVE".........

and if you have much of balance, than this feature is maybe not so helpfull (;


in easy word, it is a kind of aotuselection of the pair, with an auto limitation, to reserve the btc, that are needed for DU, for the pairs, that are "open".

7

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: January 17, 2018, 04:57:19 PM »

whats about "intellegient" or "smart" or "priority" "debagging" / double_up

the guys in the gunbot uni habe show me a good setting, to handle bags, in a case of what happen yesterday.....

but maybe it is a good idea, id you use DU, with not soooo much balance......

if you can choose a priority for a pair, or that gunbot automatical choose the paire with the less or highest -X%.....

for example:

LTC -10%
BCC -20%
XMR -2%

is you use "smart DU" (or how ever you want to call it)
GB try at first to DU the lowest bag, in this case XMR, so that GB have more free balance, to DU the next one, in this example LTC......

ok - market can change and so on, maybe a minute later XMR falls so deep, that it is the lowest, but maybe that help, to solve the bags faster with a low balance.....

8

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: January 09, 2018, 08:03:17 PM »

and another on ^^

they are telegram groups, that offer (free and/or payed) signals........

i try it since 3-4weeks and the profits amazing !......

whats about an telegram-plugin for GB, like the TV-plugin ?

GB get the signals from the telegramgoup, like that:

Buy XST 8000 - 8300

Sell 8800 - 9500 - 10400 and above


or that:

COIN: #FLO

BUY PRICE: 0.00001740 (HIDDEN GEM)

✅ TARGET ✅

1️⃣ 0.00001900
2️⃣ 0.00002100
3️⃣ 0.00003000 (mid term)

❌ Stop-loss: hold for mid term. Look like #QWARK, It’s a Hidden Gem. Daily chart is sideway now. ATH is 0.00006500. I think it will fly soon.


and trade it........

maybe use the buy price +/- X% as buying signal
and use the target as selling signal or as "gain" and start with trailing or something like that, at this point, to get more profit, if it possible (; ........

9

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: January 08, 2018, 09:39:10 PM »

another suggestion !!!!!!!!!

it often happen, that gunbot get an error (timout or what ever) and i dont see it..........
and iam wondering why are so less trades on this day and so on.......

it were really nice, to get this error via telegram or email.........

10

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: January 06, 2018, 01:57:26 PM »

i have a new small suggestion, to give GB a "wallybagging" support......

a kind of GB_dont_touch value.......



for example:
GB have bought 1ETH very high and the price falls........

so you can set GB_dont_touch to 1 and GB ignore everything under 1ETH

and above 1ETH gunbot look for "dust".....

maybe an second option for GB_dont_touch_price, so that gunbot sell this 1ETH for price x.

so you can make walleybagging on one account with the help of gunbot ?!


is a little like the funds_reserve but not for the maincurrencie.....


with this feature you dont need a second accound, only two settings in the config.......

i suggest this, becouse, if you send you bags to another account, they dont really considered in the history/PnL/balance/what ever, from the mainaccount......

and if you use more accounts for GB, thats very confusing, to calculate the profit, if you use one special account for "wallybagging"

11

Technical Support & Development / some infos for the wiki

« on: January 01, 2018, 06:36:59 PM »

hi,

they are some things, that i dont can find in the wiki.....

it had take much time, to find it out:


bitfinex only work with the right pairnames

i try it with that:

         "USD-IOT": {
            "strategy": "emotionless",
            "override": {}
         },


and everything dont work.

but with that:

         "USD-IOTA": {
            "strategy": "emotionless",
            "override": {}
         },

everything works (;


binance have a simular problem....

if there is an pairname not correct, the bot restarts and dont trade the pairs after the wrong one.



and some exchanges have a min. order amount, thats make problems, too

for example, i try GB with low balance on some account but becouse of the minimum order value it dont work (bitfinex, kraken).

it would be fine, if the real pairnames and min. order values write down in the wiki, too (;

12

Technical Support & Development / Re: 7.0.2 - BUGS !!!

« on: January 01, 2018, 06:31:46 PM »

you right !

the first thing is not really a bug, but the bot dont restart automatical, after this error.............



and the last thing........

i think it dont have something to do with "emotionless"......
the config only work, if i use that, as first pair:

            "USD-ETH": {
                "strategy": "emotionless",
                "override": {
                    "TRADING_LIMIT": 1,
                    "BUY_ENABLED": false
                }
            },   



the other are BTC-?? pairs

13

Technical Support & Development / 7.0.2 - BUGS !!!

« on: January 01, 2018, 01:37:56 PM »

hello,


i have found some bugs.......

Kraken:

On Kraken often Errors appear, like that:
"Error: API:Rate limit exceeded"

maybe it is possible, that GB auto-retry it, after an error ?


Kraken have an very high minimum ordersize:
https://support.kraken.com/hc/en-us/articles/205893708-What-is-the-minimum-order-size

i dont know, wich value i should use for trading, becouse i have not so much balance on this account and the price is changing.......

if i trade USD-BTC, and use 20$ (0.002BTC) as trading balance...... on the next day maybe 0.002BTC are 25$.....



my BTC-??? account only starts if i choose USD-??? (in my case USD-ETH) as first pair in the config........
otherwise only "loading exchange" message appears

and GB only trades (with emotionless) on pairs that i had bought by hand, before......




Bitfinex

GB make no trades with USD-??? and with BTC-???

only this:

GBXT_v7.0.2 BTC-DATA Round # 1420
------------------------------------------------------------------------------------------------
 ɢƱƝβøͳ XT Edition  Scanning bitfinex for trading opportunities 2018/01/01 14:32:16

14

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: December 15, 2017, 11:35:36 PM »

iam not shure, if this the right place here, but my suggestion is, to make the strategies as "moduls".......

for example "signals", like rsi, bb, macd, ema and so on

and on the other side some "tools" to make more profit, like trailing thing, gain, step-gain and so on......

so it is possible to combinate each......

for example:

as signal ema and gain as "tool" (sorry atm i dont find a better word).

so gunbot wait for the signal and than it use the "tool" to buy or sell........

or another example:

as signal bb and rsi and as "tool" the trailing-thing.......

gunbot waits for the bb and the rsi and if they show an ok, than it use the trailing-thing to get an good price to buy or sell.......



or for buy bb + rsi and gain
and for sell ema and trailing

gunbot wait for an ok from the bb and the rsi and then use the gain to buy for a good price
and if the ema is good it use the trailling to sell for a good price....


and so on.....

so you have much of variations and if you integrate macd and so on, too ...
you have much more (;

15

Technical Support & Development / Re: GunBot v6.0.2 Does not SELL Fiat pairs Bitfinex

« on: December 15, 2017, 10:53:48 PM »

and does "buy" work ? or "sell" with an crypto as majorcurrency ?

do you use the right names for the currencypairs ?


i dont use gunbot with bitfinex, but i had some problems with kraken, becouse of the pairnames, but now it works..

good luck !

16

Technical Support & Development / Re: Last Bid/Ask 0.00000000/0.00000000 - need help

« on: December 15, 2017, 10:51:24 PM »

problem is solved......

the reason was, becouse kraken dont repeat an error, if you use wrong names for the pairs.....

17

Technical Support & Development / Re: 2 instances of gunbot !?

« on: December 15, 2017, 10:50:18 PM »

thank you !

it work now, it was a little bit confusing with the ports and with the gui and so on, but i have config each bot and than only start the guntthy.exe and now it work (;

18

Technical Support & Development / Last Bid/Ask 0.00000000/0.00000000 - need help

« on: December 14, 2017, 03:57:06 AM »

Hello,

can somebody please help me ?


i only get this for every pair:

XXMRYUSD Last Bid/Ask 0.00000000/0.00000000

19

Technical Support & Development / Re: 2 instances of gunbot !?

« on: December 13, 2017, 06:07:16 PM »

ok, maybe it work, if i run the gunthy.exe direct .......
but it dont work in the browser-window.

and there is another bug, i sometimes dont can close the gunthy.exe, only after a reboot......

20

Technical Support & Development / 2 instances of gunbot !?

« on: December 13, 2017, 06:01:22 PM »

hello together,

how can i run two instances of gunbot ?

becouse i have two accounts on kraken, one for /usd and one for /btc.

i think it is not possible to usw two accounts of one exchange with one instance ?

so i try to run two (change the ports and ip).
i can config both, at the same time, but iam not shure if they both work together, becouse if i click "run" than only in one log-window something is shown....

and only one gunthy.exe is running.......


please help me 

nobody give me an answer via pm or telegram