321
Beginners & Help / Re: GunBot v13 causing issues logging into Kraken
« on: November 08, 2019, 10:53:41 PM »
Hi, as I told you, it depends on the exchange. For example many people needs 22+ on Poloniex. Other exchanges allow even 1.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
322
Beginners & Help / Re: GunBot v13 causing issues logging into Kraken
« on: November 08, 2019, 12:04:54 PM »
You need to increase your delay. What number? It depends on the exchange and your connection. Start setting it to 20 and check it works fine, then try 18, 16, 14 until you find the lowest amount you can set. Anyway, I think that higher delays are usually better. Personally I get better performace with higher delays (30+), so I wouldn't care too much about getting the lowest delay possible.
323
Beginners & Help / Re: license exchange
« on: November 05, 2019, 02:25:28 PM »i have not used my gunbot in a very long time but had my license for poloniex. since poloniex has rid US customers i have transferred funds to CoinbasePro and am interested in using my gunbot again since ive already paid for it. How can i get it changed to coinbase and find out how many versions behind i am. the latest i can find on my computer is 5.04
correction. found a v10 that i tried to get back into the swing of things but never got to work
Your Gunbot version is very old. New versions need a Gunthy wallet:
https://gunbot.shop/how-to-create-a-gunthy-wallet/ (You just need to follow step 1)
Once you have created your Gunthy wallet, you can donwload latest version here:
https://gunbot.shop/gunbot-v14-download-and-changelogs/
324
Technical Support & Development / Re: Error when sell cos-usdt
« on: November 02, 2019, 11:29:43 PM »
Hi Ferjat, did you add USDT-COS or COS-USDT ?
Note that you need to add always the base coin first, in this case USDT first.
In the case you added it correctly and still get that error. It's important to show us the grid and the logs so when can find out what's happening.
Note that you need to add always the base coin first, in this case USDT first.
In the case you added it correctly and still get that error. It's important to show us the grid and the logs so when can find out what's happening.
325
Technical Support & Development / Re: TypeError: Cannot read property 'needLock' of undefined
« on: October 24, 2019, 08:04:31 PM »
Glad to hear is running fine now 
326
General Discussion / Re: US trader looking for new exhange
« on: October 24, 2019, 08:03:09 PM »
Yes, you are right, it seems they are creating Poloniex.us, same as Binance did recently.
327
Technical Support & Development / Re: TypeError: Cannot read property 'needLock' of undefined
« on: October 19, 2019, 07:19:28 PM »
Try running one 1 exchange for each instance. I mean, just leave 1 api / exchange loaded in the settings, and let me know if it helps, else I would need to check the logs and take a deep look into it.
328
Technical Support & Development / Re: TypeError: Cannot read property 'needLock' of undefined
« on: October 19, 2019, 01:42:06 AM »
How many exchanges have you added to your ARM setup?
The error still says "v12.8.3.Starter"?
The error still says "v12.8.3.Starter"?
329
Technical Support & Development / Re: TypeError: Cannot read property 'needLock' of undefined
« on: October 18, 2019, 02:54:13 AM »
Are you sure? The error you sent above shows this text "Gunbotv12.8.3Starter"
330
Technical Support & Development / Re: Cannot read property "0" of undefined error
« on: October 18, 2019, 02:52:21 AM »
Glad to hear the problem is fixed now
331
Technical Support & Development / Re: TypeError: Cannot read property 'needLock' of undefined
« on: October 16, 2019, 10:54:27 PM »
Hi Vonstroken, you are running Gunbot Starter version. If you have Starter, you need to upgrade to Standard pack or higher, you can do it here:
https://gunbot.shop/product/upgrade-to-gunbot-standard/
In the case you already have Standard pack or higher, then you just need to download Full version instead of Starter version.
Hope this helps.
https://gunbot.shop/product/upgrade-to-gunbot-standard/
In the case you already have Standard pack or higher, then you just need to download Full version instead of Starter version.
Hope this helps.
332
Beginners & Help / Re: Running gunbot in Azure or AWS?!
« on: October 11, 2019, 10:23:27 PM »
To run the bot on a VPS is a good choice. AWS with Linux is free for 1 year. If you are an advanced Linux user, it's a good call, else AWS it's not worth IMO. Regarding Azure: I haven't run Gunbot on that VPS, so I can't tell.
I recommend you to take a look to the following link (points 10 and 11):
https://gunbot.shop/faq/
I recommend you to take a look to the following link (points 10 and 11):
https://gunbot.shop/faq/
333
General Discussion / Re: US trader looking for new exhange
« on: October 11, 2019, 10:10:54 PM »
Coinbase, Poloniex, Bittrex and Kraken are good ones and US friendly.
334
Beginners & Help / Re: Connecting Coinbase Pro or Kraken to gunbot?
« on: October 09, 2019, 04:52:49 PM »Hi.
I am considerimg buying the standard version of gunbot. I use both Kraken and Coinbase Pro Exchanges for trading. Which of the two plattforms would you most likely connect to gunbot? Best regards
Hi, both are good exchanges and one of the most trustworthy. Personally I prefer Coinbase. If you need some help or have any question before making the purchase, feel free to contact me via Telegram: @AitorRuiz
335
Technical Support & Development / Re: Coinbase Pro HTTP 400 Error
« on: September 27, 2019, 12:47:05 AM »
Hi, what Gunbot version are you running?
336
Technical Support & Development / Re: Problems when trading with TV_Protection
« on: September 25, 2019, 04:45:41 AM »
Hi, most likely the problem is that the bot doesn't have a reference price. I would make buy and sell orders manually and try again.
337
Beginners & Help / Re: any idea on how to retrieve a 2 years old key?
« on: September 25, 2019, 04:37:50 AM »
Hi, you need to contact your reseller via email or Telegram.
338
Technical Support & Development / Re: Email to reseller returned undeliverable - Gunthy wallet setup w/ new API
« on: September 16, 2019, 03:14:42 PM »
That reseller is no longer active. Please check the PM I have sent you.
339
Beginners & Help / Re: Are *all* Resellers in the List?
« on: September 16, 2019, 03:13:03 PM »
Always check the site is one of the official dealers:
https://github.com/GuntharDeNiro/BTCT/wiki/Resellers
https://github.com/GuntharDeNiro/BTCT/wiki/Resellers
340
General Discussion / Re: Reversal Trading Strategies
« on: September 07, 2019, 10:25:09 AM »Hi everyone,
I'm just curious how people are thinking about their reversal trading settings on USDT-BTC or other pairs relative to the quote currency's volatility? What levels do you use?
Personally I recommend not to use RT unless you know very well what you are doing. I prefer DU, and I have seen some people getting undesired results for using RT without fully understanding it.