Messages

1

General Discussion / Re: Error: "Invalid currency pair" (emotionless)

« on: June 04, 2019, 09:36:01 AM »

I disabled all pairs except for one, the message did'nt show up anymore.
Then I discovered that I had BCH running, the coin has been frozen for a while and made a switch to BCHABC & BCHSV, I just did'nt added it the right way.
Thanks for the support, its working fine now...

Kind regards,
John

2

General Discussion / Re: Error: "Invalid currency pair" (emotionless)

« on: June 04, 2019, 09:14:45 AM »

I would try something:

Remove all the pairs. Then add this one: BTC-LTC

Be sure to add it same way as I put it above (copy & paste). Always CAPS, avoid to put blank spaces, be sure to use - between BTC and LTC and not –

It should work. Then add other pair and try again, and add 1 by 1, so you can see which pair is causing the problem. Anyway, if you add existing pairs, using CAPS and taking care of "-", blank spaces or any other unwanted simbol, everything should be fine.

Thanks for the respons, I know what you mean and I will look in to this.

Kind regards,
John

3

General Discussion / Re: Error: "Invalid currency pair" (emotionless)

« on: June 03, 2019, 11:03:19 PM »

Hi, try removing BTC-ATOM

Unfortunatly, disabled it, removed it, did'nt work..

4

General Discussion / Error: "Invalid currency pair" (emotionless)

« on: June 03, 2019, 06:41:25 PM »

Hi there,

I,m running the Gunbot 12.9.2 version (23 May) / emotionless on Poloniex.
Following "Invalid currency pair" message appears:

-----------------------------------

All good...keep calm and Gunbot.

GBRT_v12.9.9.2 BTC-ATOM@poloniex Round #1 2019/06/03 19:59:45

All good...keep calm and Gunbot.

GBRT_v12.9.9.2 BTC-ETH@poloniex Round #2 2019/06/03 20:00:06

All good...keep calm and Gunbot.
"Invalid currency pair."
Error: Invalid currency pair.
    at errorHandler (C:\snapshot\gblackv12\ctx\js\poloniex.js:0:0)
    at <anonymous>
    at process._tickCallback (internal/process/next_tick.js:188:7)

(Code 14904)Requesting data...please wait...

(Code 14911)Requesting data...please wait...

GBRT_v12.9.9.2 BTC-DASH@poloniex Round #2 2019/06/03 20:00:36

All good...keep calm and Gunbot.

GBRT_v12.9.9.2 BTC-DGB@poloniex Round #2 2019/06/03 20:00:57

All good...keep calm and Gunbot.

GBRT_v12.9.9.2 BTC-ETC@poloniex Round #2 2019/06/03 20:01:16

All good...keep calm and Gunbot.

GBRT_v12.9.9.2 BTC-LTC@poloniex Round #2 2019/06/03 20:01:34

-----------------------------------

Message appears after the "GBRT_v12.9.9.2 BTC-ETH@poloniex" reading 
Even when I disable ETH the message appears.
Anyone have an idea.....?

Kind regards,
John

5

Beginners & Help / XT 7.0.2 shows limited data (solved)

« on: December 28, 2017, 05:15:06 PM »

Hi,

I run the 7.0.2 Bot on contabo VPS SSD server via Poloniex, it ran perfectly until yesterday, now the log is showing very limited data, same issue takes place when I run the 7.0.1 version.
Don't know what this is but I would be very grateful if someone has an answer or a solution for this...

John

Note: Just checked and now it seems to be running as usual... so, surprised at nothing..

6

Beginners & Help / EMA1 & EMA2 settings on Poloniex

« on: December 13, 2017, 12:27:21 PM »

Hi, I have a question about the EMA settings.
I've noticed different EMA1 and EMA2 values on Poloniex relative to Gunbot, is there somehow a correlation between the two values and when so, how do I set it up correctly.
I understand the EMA settings on Gunbot, but it seems that Poloniex runs a different type of setting when it comes to EMA, how should I read and understand this..?

Thanks

7

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 09, 2017, 08:00:23 PM »

Well, yes if you trade only against bitcoin. If, for instance, you plan to trade against USDT, you need a USDT balance, and so on. I trade a lot in pairs against EUR and BTC (not simultaneous pairs, some altcoins against the EURo and some other altcoins against BTC), so I keep a balance both in BTC and in EUR on my account.

I understand, thanks for the support sloaleks, you've been a big help.. 

8

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 08, 2017, 07:21:42 PM »

No, you only need to buy your base currency, or have it sent from your wallet. So, in trading against BTC, feed the bot just bitcoin ...

So, I only need a balance in BTC on polo and Gunbot takes care of the rest, right?

9

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 07, 2017, 12:50:26 PM »

OK, thanks vicdr, it seems logical.

Cisco, how do you expect a trade on a downtrend pair? For the bot to buy there needs to be a trend reversal ...

You're absolutely right sloaleks, I now traded on an uptrend pair and I got my first buy/sell, I'm very excited to see it actually work...
Thanks for the support, this was very helpfull... 
One question though: Do I have to buy BTM balance myself to get Gunbot start trading? I may assume the bot does this automatically by itself is it?

10

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 07, 2017, 11:23:55 AM »

.....
Another question:
When the bot is running, some trading-pairs shows the term “NaN”, what does this mean?

NaN is an acronym and means: Not a Number...

NaN is referring to an incalculable equation..

In context, it means gb can't calculate the exit price until it has made the buy, at which point it then has an entry price from which to calculate the strategy exit price.

Thats right, when I look in polo under Trade History/My Trades and there's no history, the term "NaN" shows up, if I then buy a small amount of the currency the term "NaN" is gone and the exit price shows normal values, so this must be somehow connected, still learning, still learning... 
This is how Gunthar refers to this issue:

11

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 06, 2017, 06:54:00 PM »

I changed the EMA settings on polo and gunbot, 4 hours equals 240 min : 15 = 16 right?

As you can see in the Gunbot Log, there are trading opportunities but it has not made a trade yet and shows a CALLBACKS entree, should I just wait it out, or do you have any more suggestions or corrections how to eventual optimize the Bot and how to avoid the CALLBACKS issue.
Thanks...

12

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 05, 2017, 03:58:05 PM »

So, I changed the parameters on Polo and the Bot, using the bb strat. on BTC_SC and these are the results so far,
is it right to set the EMA to 48 (for 4 hours) and 24 (for 2 hours)?

As you see in the Gunbot-Log the term “NaN” showed up again, does this affect the trading results and how can I avoid this? 

13

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 05, 2017, 10:44:50 AM »

Your polo graph doen't match your settings. You are looking at 15 min candles, but you have set 5 minut periods. Also, EMAs are little low, generally they are set 4/2 hours. You have 80/40 minutes. If you are after trades, and having BB your buying strat, setting it to 25 will take a while to get monero, or doge (doge is a completely other can of worms, check its graph) or bitcoincash bought. so, there's your reasons for no trades. You are looking at a different picture than the bot, and you are set very conservatively in bearish market ... You need to find a slightly climbing pair, set the candles to the same you have on your strat, and see if it at all reaches your low BB. If not, set accordingly. With pairs like these and the settings you have, you can't expect the bot to buy. It does not perform miracles ...

Thanks sloaleks, I appreciate your respons, this will help me to change parameters and see how this works for me, I'll keep you informed..... 

14

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 04, 2017, 05:06:50 PM »

Okeyz, you have set your trade limit within polo minimum order sizes, so that should be good:
Poloniex Minimum Trade Sizes

Bitcoin (BTC pairs): 0.0001 BTC
Ethereum (ETH pairs): 0.0001 ETH
Monero (XMR pairs): 0.0001 XMR
Tether (USDT pairs): 0.0001 USDT

Now, what strategy on what pair? Copy your strategy here and let's see.

I use bbstepgain as a strategy on all pairs, thanks for the support so far, I appreciate it..

15

Beginners & Help / Re: Minimal amount BTC & "NaN"

« on: December 04, 2017, 10:59:17 AM »

I’m a little bit of a newbie with a question:
Is there minimal amount of BTC required to get the Gunbot start trading?
I bought 0.006 BTC for testing-purposes to see how its running, well, I’m running it for 48 hours now and the Gunbot did not made a single trade yet..

Another question:
When the bot is running, some trading-pairs shows the term “NaN”, what does this mean?

 

Depending on your exchange, this might (or not, we don't know on what exchange you trade) be too small for some pairs. The bot doesn't care, but the exchange does. What version of gunbot are you using?

I,m using the latest version 6.0.2 on Poloniex

16

Beginners & Help / Minimal amount BTC & "NaN"

« on: December 04, 2017, 10:24:22 AM »

I’m a little bit of a newbie with a question:
Is there minimal amount of BTC required to get the Gunbot start trading?
I bought 0.006 BTC for testing-purposes to see how its running, well, I’m running it for 48 hours now and the Gunbot did not made a single trade yet..

Another question:
When the bot is running, some trading-pairs shows the term “NaN”, what does this mean?

 

17

Beginners & Help / Undefined

« on: November 30, 2017, 12:36:26 PM »

Well, I tried the BB strategy and it seems to be working now, no profits yet but that's another topic, still learning to figure it all out though ...

This topic can be closed ...

Thanks