Username: Password:

Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
Technical Support & Development / Re: StepGrid strategy selling lower amount
« Last post by RobinPogo on December 28, 2021, 10:32:49 AM »
Because of this behavior, it often happens that the bot sells for less than it buys especially for "small" amounts*. It usually resolves by itself when the PA is above break even and the whole bag is sold. Given how setpGrid works, it might take a while before it happens since there is no DCA involved to lower the break-even PA. A workaround I applied is to increase the fees of the exchange. For Binance, I set it to 0.75 instead of 0.1. The bot trades less, but the trades are more meaningful. If I'm not misleading, the sell price is computed so the profit is larger than 2 * exchange fees. With my settings, the net profit taken should be at least 1.5 - 0.2 = 1.3 %, minus the 'dust'.

With this approach, I am rarely disappointed of the results when the position is sold, which was happening in the past. I used to have a position in a coin which lasted several days only to realize that I had made like 0.30 USDT of profit while investing hundreds of USDT.

However, it is worth noting that when the PA is close to the ATH, it might be difficult to sell the whole bag. So pay attention to shitcoins if you are using the same approach. More generally, trading close to the ATH is risky anyway.

* small in comparison to the coin unit, so $100 is considered a small amount. Moreover, one needs to take into account that a market order implies an unpredictable sell price, adding some uncertainty to the actual profit taken.
22
Technical Support & Development / Re: SpotGridAdvanced and Trading Limit Percentage
« Last post by Aitor on December 28, 2021, 05:29:13 AM »
It's not possible to do that for that strategy, it would mess the calculations.
23
Technical Support & Development / Autoconfig Question
« Last post by kriptova on December 25, 2021, 11:00:23 AM »
I want to add pairs from binanceFutures that has this category:
- volume higher than 500BTC in 24 hours
- change in 24 hours -3% or higher (-3%,-4%,-5%etc, you call it higher or lower)

Can someone help what kind of parameters should I add in addPair autoconfig?

Thanks
24
General Discussion / Re: Gunbot faulted out and will no longer start
« Last post by Aitor on December 22, 2021, 09:25:30 AM »
Gunbot has suddenly decided it doesnt want to load anymore. Below is the error its throwing repeatedly.



Your registered exchanges:
KRAKEN:

Loading exchange - kraken
Loading data....
TypeError: Cannot convert undefined or null to object
    at Function.keys (<anonymous>)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at Timeout._onTimeout (C:\snapshot\enricoranucci\Desktop\STABLE\gui\sockets\coremem.js)
    at listOnTimeout (internal/timers.js:549:17)
    at processTimers (internal/timers.js:492:7) Uncaught Exception thrown

Tracked it down to the following pair in the config file
"USD-STORJ": {
                "strategy": "bbta-tssl",
                "enabled": true,
                "override": {
                    "TRADING_LIMIT": "20",
                    "MIN_VOLUME_TO_SELL": "10",
                    "MIN_VOLUME_TO_BUY": "10",
                    "BOUGHT_PRICE": null,
                    "PERIOD": "1h"
                }
            }

I set bought price to a value since I imported several hundred coin to the exchange. Gunbot eventually sold it. Looks like Gunbot set the bought_price to null then
got all upset about it. Gunbot should have deleted the entry alltogether when it was no longer valid. I would call that a bug.

What version of the bot are you using?

Try removing the line  "BOUGHT_PRICE": null,
25
General Discussion / Re: KuCoin Futures/Margin Support?
« Last post by Aitor on December 22, 2021, 09:17:44 AM »
Not yet.
*poke*

Any upcoming news, or reason as to why it hasn't been supported yet?  I know KuCoin is only growing in it's usage levels and userbase.

No news yet.
26
Technical Support & Development / Re: StepGrid strategy selling lower amount
« Last post by sbogovac on December 21, 2021, 08:18:09 AM »
Hey all, I have been playing for a few weeks with the new StepGrid strategy and I have noticed a strange behaviour, not sure if it's a bug or it's intended to work that way.

I am trading USDT-ETH pair on binance. I have set trading limit to be 100 USDT. Everything works great except the following thing.

Lets take the example from this morning. Bot buys 99.7260 USDT worth of ETH (I understand that even though I have set 100 USDT as trading limit, because of fees bot buys with 99.7260 USDT amount). When it's time to sell, bot sells 0.0248 ETH which is worth 99.7377 USDT.

My question here is, why bot haven't sold the whole amount of ETH it previously bought? Is it possible to adjust my settings somehow to fix this?


Easier to visualise example:

Code: [Select]
        Rate        Amount      Total
SELL    4021.68     0.0248      99.7377

BUY     4005.06     0.0249      99.7260

Thanks in advance!


Unfortunately, it seems to be a "feature" of StepGrid. As we speak StepGridHybrid is being user-tested which addresses this behaviour. Unfortunately it is not available for all exchanges (and thus users) yet...

27
Technical Support & Development / StepGrid strategy selling lower amount
« Last post by markojokic on December 21, 2021, 07:52:23 AM »
Hey all, I have been playing for a few weeks with the new StepGrid strategy and I have noticed a strange behaviour, not sure if it's a bug or it's intended to work that way.

I am trading USDT-ETH pair on binance. I have set trading limit to be 100 USDT. Everything works great except the following thing.

Lets take the example from this morning. Bot buys 99.7260 USDT worth of ETH (I understand that even though I have set 100 USDT as trading limit, because of fees bot buys with 99.7260 USDT amount). When it's time to sell, bot sells 0.0248 ETH which is worth 99.7377 USDT.

My question here is, why bot haven't sold the whole amount of ETH it previously bought? Is it possible to adjust my settings somehow to fix this?


Easier to visualise example:

Code: [Select]
        Rate        Amount      Total
SELL    4021.68     0.0248      99.7377

BUY     4005.06     0.0249      99.7260

Thanks in advance!
28
Technical Support & Development / SpotGridAdvanced and Trading Limit Percentage
« Last post by felixinbali on December 21, 2021, 06:23:43 AM »
I'm using the SpotGridAdvanced startegy with USDT-ETH with success so far and it survived few dumps.
Is it possible to set the trading limit as following?
Balance settings (override):
=Total Base * x Trading Limit Percentage for the initial order. Then DCA uses whatever is configured as multiplier for each DCA.
I tried but it doesn't work and used the trading limit from the strategy.
I would like to allow the bot to use the trading gain to trade incrementally more.

Anyone has success in the longer term using manual gain instead of auto gain and with what percentage?
29
Technical Support & Development / Re: Backtesting help
« Last post by Aitor on December 21, 2021, 03:01:27 AM »
Hi, you have to set the parameters manually in your TradingView account.
30
See below.
Pages: 1 2 [3] 4 5 ... 10