Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sbogovac

Pages: [1] 2 3 ... 6
1
General Discussion / Re: Gunbot forum still alive?
« on: June 30, 2022, 07:58:24 AM »
Mostly Telegram. Your reseller should invite you to the appropriate groups...

2
General Discussion / Re: Gunbot forum still alive?
« on: June 28, 2022, 08:23:15 AM »
Nope, this forum isn't very active anymore. As are most fora. These have been replaced by other means of communication...


3
Hi,
I brought the gunbot pro with 3 api slot. Can i run on 2 different pc together and individual pc set 1 different api each? So that i can run different autoconfig for different api.

Thank you
You can, but you could also run that in two/three different folders on the same PC (as long as you set different ports)...
Good to know this. Thank you for your replies and advice.  :)

You're welcome. I just remembered you can also read about it in the Gunbot Wiki: https://wiki.gunthy.org/setup-and-general-settings/installation-and-startup/multiple-instance

4
Hi,
I brought the gunbot pro with 3 api slot. Can i run on 2 different pc together and individual pc set 1 different api each? So that i can run different autoconfig for different api.

Thank you

You can, but you could also run that in two/three different folders on the same PC (as long as you set different ports)...


5
Hi Dev,
Is there any Gunbot V24 develop for Raspberry pi 4?

Nope, can't fine one (yet?)...

But wouldn't surprise me if arm builds (that the Pi also uses) would be deprecated...

6
Technical Support & Development / Re: maker how to get it
« on: February 10, 2022, 06:53:36 AM »
maker how to enable that???

is it a buy mondul

or is it still token buy 24000
cant fin a thing about it

 :-\ :-\ :-\ :-\ >:( >:( :( :( :(

Yes, for Marker Maker you need to hold some 24.000 Gunthies in your Gunbot Wallet.


7
I am using stepgrid , How to set never buy above a specific price . I donít want this bot keep chasing high.

Doesn't "NBA" [Never Buy Above] work? I quote from the wiki:

Quote
NBA#

Description
"Never Buy Above". Use this to only allow buy orders below the last sell rate.
This sets the minimum percentage difference between the last sell order and the next buy. The default setting of 0 disables this option.
When set to 1, Gunbot will only place a buy order when the strategy buy criteria meet and price is at least 1% below the last sell price.

Values
Values: numerical, represents a percentage.
Default value: 0

Order types
Affects: Strategy buy

Name
Parameter name in config.js: NBA

Although IMO (and I am a "GRID" fan) this does defy the sense of GRID a bit, doesn't it..?  ???




8
Hey all, I have been playing for a few weeks with the new StepGrid strategy and I have noticed a strange behaviour, not sure if it's a bug or it's intended to work that way.

I am trading USDT-ETH pair on binance. I have set trading limit to be 100 USDT. Everything works great except the following thing.

Lets take the example from this morning. Bot buys 99.7260 USDT worth of ETH (I understand that even though I have set 100 USDT as trading limit, because of fees bot buys with 99.7260 USDT amount). When it's time to sell, bot sells 0.0248 ETH which is worth 99.7377 USDT.

My question here is, why bot haven't sold the whole amount of ETH it previously bought? Is it possible to adjust my settings somehow to fix this?


Easier to visualise example:

Code: [Select]
        Rate        Amount      Total
SELL    4021.68     0.0248      99.7377

BUY     4005.06     0.0249      99.7260

Thanks in advance!


Unfortunately, it seems to be a "feature" of StepGrid. As we speak StepGridHybrid is being user-tested which addresses this behaviour. Unfortunately it is not available for all exchanges (and thus users) yet...


9
General Discussion / Re: Accessing the training
« on: August 24, 2021, 09:05:48 AM »
Hi All - I am new and purchased Gun bot via a reseller.  I am trying to work out how I can access the training materials on gunthy.org site.

Your reseller should invite (and guide) you.

10
That's not a solution. The problem is that when a bag DCA's into a break-even sell, it frees up funds and, depending on the market, it might buy the coin again.

Say for example I got a bag of ETH right now. I add funds, it DCA's, the marketprice rises, Gunbot decides it's time to sell, now I've got even more funds. Now the rest of the market does nothing, so my ADA, DOT and LINK don't DCA. ETH follows by dropping 3% and Gunbot decides to buy. Gone are my funds to DCA and clear bags on other alts.

I want to allow DCA, but don't want to allow filling empty bags. As Gunbot is, should be, automated software, I feel it's incorrect to be required to check every few hours if it sold a bag.

Yes, and then you re-enable them...?

Gunbot is an automator, not AI... it's not like when you install MS Word your PC starts writing bestsellers for you, is it?

If you want, you can write your own AutoConfig to do the dis-/enabling for you: https://wiki.gunthy.org/how-to-work-with-gunbot/extras/autoconfig

Quote
Automated config changes for Gunbot. Enables you to automatically add or remove trading pairs, or change pair overrides - using filter criteria you define.


11
Ever since all markets crashed 40-70%, Gunbot hasn't been doing anything anymore. I've got bags and my wallet doesn't have any change to buy more to DCA. I don't mind putting in a few fiat to allow some DCA. But I don't want Gunbot to buy 'new' coins, only DCA.

Is there a simple way to allow DCA-buying, but disallow buying new coins for which are configured, but you don't have any bags yet?

Remove/disable those coins first (before adding funds)...?

12
Technical Support & Development / Re: [ERROR] Kucoin Not Exist
« on: June 07, 2021, 08:16:13 AM »
Good morning,

I've been using Gunbot V22 with no issues for the past month or so, trading on KuCoin. This morning I woke up and discovered the bot has stopped trading and gave me the following error message: [...]

I do not use KuCoin myself, any more, but I saw some discussions about KuCoin being broken and a fast fix by Gunthar in the Telegram channels last night. I believe a fix (Gunbot v22.0.2.3) has been posted on the ANN channel.

13
Beginners & Help / Re: PNL only showing USD (incorrectly)
« on: June 02, 2021, 10:32:53 AM »
Hello all, I am relatively new user after having a 3 year break from GunBot (dumb decision).  I'm loving the new version but have a question about the PNL - after running the bot for about a week on very small trades, it shows "Total Profit   0.00028439 USD" however from what I can figure this should be BTC rather than USD.  I'm guessing it is user error and there is something I should be changing, but can't search/find what I'm after.  Any assistance appreciated.

Unfortunately it's no "user error"... it's a known issue, and being worked on as we speak.

14
Thank you.  We are in contact, he's super smart and incredibly helpful, but we still can't figure it out.  What I've found is that I believe the core is having an issue. [...]

Then you or your reseller can report a #corefix at the appropriate Telegram channel:
1.- strictly running the latest build from announcement channel;
2.- provide config.js (save export without private info);
3.- provide the state.json file of the pair;
4.- provide and extra description you think is useful for us; and,
5.- tag your reports with #corefix.


15
I would advice to contact your reseller for primary support.

16
Technical Support & Development / Re: Don't connect binance
« on: May 17, 2021, 07:44:35 AM »
I just bought a key version V12, now I'm setting it up. I followed the intructions from the video (tu dien link). I added BTC-ETH, instead of turning them on, I clicked "start bot" to check its connection to binance. Then I saw no connection like what was in the video, but spotted a notification on screen in the attached image . And it fell into the repeating circle, consecutively reconnected and still had no connection to binance. Could you please give me some solution to this problem? I'm looking forward to hearing from you.

You reseller is your first point of contact to get you going/started...

From the error message though I'm presuming there's an error in the pair naming. Did you add it through the GUI?

But v12? Are you sure? Or am I misreading something ("key version")? We're on v22 at the moment...

17
General Discussion / Re: Proft/Loss not calculated
« on: May 10, 2021, 07:54:30 AM »
Yes, the PNL calculations are off. It is a known issue and being worked on as we speak...


18
Beginners & Help / Re: How to Recover my Gunbot license
« on: May 06, 2021, 02:02:51 PM »
I contacted admin after read this post! Thanks
https://forum.gunthy.org/index.php?topic=4223.0

------------
Dear Supporter!
I had buy a Gunbot Unlimited for a Long time (2017)
After Bitcoin falling down, i stop using gunbot.
Now i want to use it again
but i can not contact to last Resller. They are tradingbotpro.com (This website is shutdown)

Now i have all information in email.
How can i recover my license. Please Help. Thanks

Do you use Telegram? I think the admin of this forum (@AitorRuiz) should be able to point you in the right direction...

19
I am also getting an error in futures.  Tradingview.com signals and other signals have errors.  Can you send me the version suitable for futures?  [editedout]@gmail.com

First: please, PLEASE delete your email address from this public website... enough scrapers running around for collecting them.

Second: latest version just got released at: https://github.com/GuntharDeNiro/BTCT/releases/

20
Technical Support & Development / Re: Tradingview Alert
« on: May 05, 2021, 10:12:23 PM »
[...] I can't reach my gunbot seller (fuathan). Should I write here when I want support. Or are there other channels?

Who is your reseller? I cannot seem to find any "fuathan" on the list of resellers: https://gunthy.org/resellers/

There are other channels (like telegram and wiki), but your reseller should point them out to you...

Pages: [1] 2 3 ... 6