Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - tammons

Pages: [1] 2
1
Beginners & Help / TSSL with trailme Sell
« on: September 05, 2020, 04:29:54 PM »
Do TSSL sell and trailme sell do the same thing?

Like if you are using TSSL to sell and select the trailme option, is it redundant?

2
General Discussion / Issue with SMAcross/Gain
« on: August 29, 2020, 12:07:43 PM »
So, I have Gunbot set up like I want (or close) and it is trading, but when Gunbot sells it is not selling all my holdings.

It sells everything except for 0.2506% every time it sells.

Is there any way to correct this?

3
Beginners & Help / Gunbot 18.8.8 set period
« on: August 27, 2020, 01:59:55 AM »
I am coming from the old version of gunbot which was pretty simple to use.
But this new version 18 seems counter intuitive.

I have figured out most of it, but for the life of me, I cant find where to set the period for candlesticks.
It is set in a way that returns an error on Bittrex.


Where is the setting for period?

4
Haven't used gunbot in a while.
I own the old version, I think I went up to version 8 or 9.

In the old version, there was no gunthy wallet. Now there is.

I installed and got everything set up, key and secret etc, and set up the exchange.

I created a Gunthy wallet which is now empty.

I assume the coin paid for gunbot goes into this wallet?
Or is there something I am missing?

Anyway when I run gunthy-win.exe the text in the window continuously runs and returns this message...

"Failure to meet minimum Gunthy token balance requirement to operate the bot. Please purchase more tokens to run the bot..."

So, what do I need to do to get this version running?

5
General Discussion / Suddenly gunbot is not selling.
« on: April 13, 2018, 03:41:49 AM »
I had 2 runups 2 different coins and gunbot did not sell. One 12% up and the other 8%.
And then they turned down and back up with parameters met, but no sales execution.
I am running on Vulture.

Running stepgain with gain set to 2%, 3 steps, 2,4,12.

Also Logs dont work.
If I stop and start GB, or apply a configuration change, it shows the green config text in the logs box and then does nothing else.

I think abotu the time the logs stopped, GB stopped trading.

6
General Discussion / Restarting gunbot on manual buy or sell
« on: February 14, 2018, 03:11:00 PM »
Do you still need to restart the latest version of gunbot after a manual buy or sell?

7
General Discussion / BBrsistepgain has dissapeared from the strategies
« on: January 05, 2018, 04:29:25 PM »
Everything was running fine, and then BBrsistepgain disappeared from the strategies and GB is not running.

Anybody know what is going on?

8
For me, stepgain usually sells too early on a minor dip.

Exactly what controls Xtrend, and how can I set it to avoid selling on minor dips?

Do EMA1 and EMA2 control it? Or it it a combination of indicators?

Will raising EMA1 and EMA2 allow GB to miss the minor sell dips?

Thanks

9
Beginners & Help / BBRSISTEPGAIN VS BBSTEPGAIN
« on: December 08, 2017, 07:42:50 PM »
What is the real difference between these two stragegies.

Both have an RSI_BUY_LEVEL setting so I am trying to understand what the real difference is.

Thanks

10
Beginners & Help / Help with stepgain setting SELLLVL
« on: December 06, 2017, 03:00:52 PM »
I understand that you set the sell level % and level and then stepgain will try to sell at that point, and if not will back down to the previous level (or between) and previous level again and try to sell.

What I am not clear on is the SELLLVL setting.

Say I have the sell levels set at 2 , 5, 25.

Why and or when would I want to set the SELLLVL at 2 instead of 3?

Thanks


11
General Discussion / DOUBLE_UP is buying outside of fundamentals
« on: December 03, 2017, 07:25:12 PM »
Not working correctly, so beware.

This is on the latest version of GB

The first double up was correct.

The 2nd and 3rd double up never should have happened, so it apparently has issues.

Original buy 4.6 @ .000869
1st double up 4.6 @ .000836
2nd double up 9.2 @ .000843
3RD double up 18.4 @ .0008625

So in reality it is averaging up from each previous buy.

The RSI was good on the 1st double up. RSI = 27.
The RSI on the 2nd double up was 60 = too high.
The RSI on the 3rd double up was 40 = still too high.

Please fix.
 
Also to the programmers, you should have a switch to single up. IE like it would buy the same amount each time the conditions are met. IE 1 - same amount as the original purchase each time. 2 would buy 2x the amount.

And how about a stop to averaging down. IE 1 = one average down. 2 = two averages down. Etc.

12
General Discussion / BB vs BBRSI in the latest GB - what is the difference?
« on: December 03, 2017, 01:45:37 PM »
Since BB now has RSI buy and sell levels, what is the difference between these two strategies?

13
Beginners & Help / Can you turn off a pair but leave it in a running setup?
« on: November 26, 2017, 06:27:08 PM »
Can you turn off a pair but leave it in a running setup?

14
General Discussion / gb v6 ping pong not buying.
« on: November 26, 2017, 02:30:47 PM »
Anybody else?

Also GB would not buy any initial order, until I bought manually, then it would start working.

15
Beginners & Help / Averaging down manually
« on: November 19, 2017, 07:55:42 PM »
As we know, a lot of times coins suddenly dump and will recover in a short amount of time. Sometimes only minutes.

At these times I would like to add to my position at the low.

Turn GB off and on to reset it, and let GB ride it back up and sell at the correct % above the average purchase price.

Will GB average the two buys, IE the GB buy and the manual buy, and find the correct % exit point?

Thanks

16
General Discussion / EMA1 and EMA2 settings?
« on: November 18, 2017, 12:55:15 PM »
When I got gunbot, the EMA1 and EMA2 settings were preset.
EMA1 was preset to 24 and EMA2 to 12.
The manual says this is correct.

Now, I am reading on the internet about gunbot EMA1 and 2 settings. I think it was a blurb from Gunther.
Says EMA 2 should be twice as high as EMA1, or exactly opposite of how it came preset.

I am now running GB as it came, with the factory EMA settings. Is this the wrong sequence?

Can someone please tell me the correct way to set the EMA1 and 2 since I am reading conflicting info?

Thanks

17
General Discussion / Can anybody explain this message?
« on: November 17, 2017, 11:09:25 PM »
Running gunbot in bbrsi mode, several pairs, and I just missed 3 buys where all the conditions were met.

The RSI was below my buy line. The candle was at or below the lower BB and or within the BB percentage range.

I am getting the message - "Waiting to buy: Price too high!!"

So all the conditions were met and whatever was causing the "waiting to buy" message long enough to stall the buy, and then the MA went above the RSI line and the lower BB, effectively cancelling the buy.

I have had this happen several times before and would like to know what controls the "waiting to buy message."



18
General Discussion / And my memory usage continues to rise
« on: November 15, 2017, 03:17:56 AM »
Type: Cloud Server XL
CPU: 2 vCore
RAM:4 GB
SSD: 120 GB

8 pairs

Processor spiked to critical twice.
Has now settled at 85%.

Memory usage just spiked at about 90% or 3.6GB !


19
Beginners & Help / Within GB XT is there a way to double up manually?
« on: November 10, 2017, 06:41:38 PM »
I dont want double up left on in GB.

I would rather control it manually.

I dont do it often, but I have a few coins that will tank and then shoot straight back up and it would be nice to add at or near the low point manually....

I considered just buying them on bittrex, but I have read where it causes problems with GB calcs and people have gotten bad sells. Or has this been corrected in GB XT. IE if you buy manually while GB  XT is running will it readjust the balance and find a new sell point.

20
Beginners & Help / New gunbot XT bbrsi and bbrsibb and bbbbrsi
« on: November 10, 2017, 01:54:16 PM »
The manual inst out yet.

Can anybody explain how these differ?

I assume bbrsi uses the combo of bb and rsi to both buy and sell?

bbrsibb?

bbbbrsi?

Pages: [1] 2