Messages

1

Technical Support & Development / Re: [NOT RESOLVED]Couple issues, Invalid License amongst them - Reseller Not Helpful

« on: March 28, 2019, 01:59:36 AM »

I did try to fix your issue on the spot, even if you dont seem to want to understand (30 emails and replies later) that over email it takes a lot of time between requests ... and .. over Telegram I can fix your issues on the spot, without waiting for a email response ... the main point was to help you faster fix your issue .

And again I will tell you the same thing that I told you over email :

1. Your license is correct and active
2. Start with a fresh install and follow the information here :

Gunbot Github Downloads
https://github.com/GuntharDeNiro/BTCT/releases

Gunbot first time installation video - Windows :
https://www.youtube.com/watch?v=PN38iW4BFxM

Gunbot Wiki - Quick Start Guide
https://wiki.gunthy.org/setup-and-general-settings/installation

How to create a ERC20 Wallet for your GUNTHY tokens
https://wiki.gunthy.org/setup-and-general-settings/exchange-and-license-settings/gunthy-wallet/how-to-create-a-wallet

Direct Gunbot Telegram Groups :
Direct Support group for our website : https://t.me/gunbottrading

If you are unable to get Gunbot to work, please contact me over Telegram, my nickname is @leeview and I will assist you live.

.thank you and have a very nice day as well .

2

Technical Support & Development / Re: Couple issues, Invalid License amongst them - Reseller Not Helpful

« on: March 09, 2019, 01:25:03 PM »

Hello there,

To get your issue sorted you are always welcomed and invited, to join our live Gunbot support groups on Telegram .. since you can get live help there, directly from me, or from the other support guys, if for some reason I'm not there .

I will post a public link here to a Group you can join right now and get help :

Direct Support group for our website (thecryptobot.com) : https://t.me/gunbottrading
You can find me directly on Telegram, my id is : @leeview

You can also find the other links to the non-public Gunbot Groups in your emails passed between us .


I do apologies in the name of the Gunbot team in advance for the shortages you may have had with the Gunbot licensing servers.
Our licensing system changed and has gone throw major transformations, by adding the new GUNTHY coin and wallet based Licensing system. For this reason, some users may have experienced similar issues .

Do join me on Telegram and we will fix any licensing issue you might have .


Happy trading and Plus Profits !

3

Technical Support & Development / How to Set File Permissions - Gunbot XT - Windows & Mac OS - GIFs

« on: December 14, 2017, 04:18:23 AM »

Gunbot XT needs file permissions set, so he can create and write the need config, log, err and database file .

Set File Permission in Windows :



Set File Permissions in Mac OS (and run WEB GUI) :

4

Technical Support & Development / Re: Gunbot not running. Multiple command windows.

« on: November 24, 2017, 04:54:55 PM »

That is a faulty config.js .

Start fresh and follow the guide and all will work smooth .

Cheers .

5

General Discussion / Re: purchased threw cryptobot and says invalid license

« on: September 16, 2017, 10:33:43 AM »

I'm sure this issue already got resolved, but do contact me for any issues and / or, for Gunbot 3.3.2 also see this list of errors and fixes :

https://thecryptobot.com/2017/09/03/troubleshooting-gunbot-3-3-2-error-codes/

cheers !

6

Beginners & Help / How to FIX the JSON GUI CRASH - Windows GUI - Gunbot 3.3.2

« on: July 21, 2017, 09:45:35 PM »

How to FIX the JSON GUI CRASH - Windows GUI - Gunbot 3.3.2

GUNBOT 3.3.2 GUI (Windows) will sometimes crash .

There is a very simple thing to do :
1. When you start a new pair, a new message box will appear that tells you to wait .
2. DO NOT click on Retry or Cancel and let the message box disappear by itself .

[youtube]https://www.youtube.com/watch?v=7bBewKoN0x0[/youtube]

Youtube video (for high resolution) :
https://youtu.be/7bBewKoN0x0

Original post :
https://thecryptobot.com/2017/07/21/fix-jsongui-crash-windows-gunbot-3-3-2/

7

General Discussion / Re: How did I go wrong here?

« on: July 05, 2017, 11:23:16 AM »

Yes .. that's the problem ... 250 BTC .. cute ! 

the MAX BALANCE setting is the maximum value in BTC per coin-pair that you want GunBot to trade for that coin-pair .

Cheers ! 

8

General Discussion / Re: Feature request - Pair Chooser

« on: July 05, 2017, 11:21:09 AM »

GunBot is a software that Automates Trades for you, based on a set of rules you have to SET .

DO you want the bot to think for you ? mmm ... that will take some time .. starting now .. please wait ...

9

General Discussion / Re: Is the Kraken license worth it?

« on: July 05, 2017, 11:18:51 AM »

Kraken still has some minor issues with the Dust / very small portions getting stuck and the pair would wait to sell forever .

other then that, kraken is a solid / long-time market .

Cheers !

10

General Discussion / Re: Gunbot 3.3 - SMART edition: Windows/Linux/MacOs/armv6/armv7 - Release name "Sato

« on: July 05, 2017, 11:12:01 AM »

Latest version Download :

MAIN RELEASES LINK
https://github.com/GuntharDeNiro/BTCT/releases/

LATEST GUNBOT 3.3.2 DOWNLOAD LINK
https://github.com/GuntharDeNiro/BTCT/releases/download/Gunbot3.3.2/GUNBOT_v3.3.2_Poloniex_Bittrex_Patch.zip

11

Beginners & Help / Re: GUNBOT V3 FOR MAC OS X

« on: July 03, 2017, 08:40:28 AM »

We need a visual confirmation / screenshot of GunBot working with WINE or any other emulation software .

If not, this guide is still the best for running GunBot on a Mac / OS x .

 

12

General Discussion / Re: Gunbot 3.3.2 - Poloniex/Bittrex Patch

« on: July 02, 2017, 02:19:29 PM »

And it's almost time for the new version Update .

Can't wait to see what more cool stuff Gunthar added for us ! yey ! 

13

Beginners & Help / Re: WINDOWS TUTORIAL FOR GUNBOT - VIDEO

« on: July 02, 2017, 03:17:46 AM »

Well .. let me add my bat file :

_______________________________________________________________

start cmd.exe "BTC_AMP" /K gunthy.exe BTC_AMP poloniex
TIMEOUT /T 14
start cmd.exe "BTC_BELA" /K gunthy.exe BTC_BELA poloniex
TIMEOUT /T 14
start cmd.exe "BTC_BTCD" /K gunthy.exe BTC_BTCD poloniex
TIMEOUT /T 14
start cmd.exe "BTC_BLK" /K gunthy.exe BTC_BLK poloniex
TIMEOUT /T 14
start cmd.exe "BTC_BTS" /K gunthy.exe BTC_BTS poloniex
TIMEOUT /T 14
start cmd.exe "BTC_BURST" /K gunthy.exe BTC_BURST poloniex
TIMEOUT /T 14
start cmd.exe "BTC_DASH" /K gunthy.exe BTC_DASH poloniex
TIMEOUT /T 14
start cmd.exe "BTC_DGB" /K gunthy.exe BTC_DGB poloniex
TIMEOUT /T 14
start cmd.exe "BTC_ETH" /K gunthy.exe BTC_ETH poloniex
TIMEOUT /T 14
start cmd.exe "BTC_EMC2" /K gunthy.exe BTC_EMC2 poloniex
TIMEOUT /T 14
start cmd.exe "BTC_FLDC" /K gunthy.exe BTC_FLDC poloniex
TIMEOUT /T 14
start cmd.exe "BTC_GAME" /K gunthy.exe BTC_GAME poloniex
TIMEOUT /T 14
start cmd.exe "BTC_GRC" /K gunthy.exe BTC_GRC poloniex
TIMEOUT /T 14
start cmd.exe "BTC_GNT" /K gunthy.exe BTC_GNT poloniex
TIMEOUT /T 14
start cmd.exe "BTC_LSK" /K gunthy.exe BTC_LSK poloniex
TIMEOUT /T 14
start cmd.exe "BTC_LBC" /K gunthy.exe BTC_LBC poloniex
TIMEOUT /T 14
start cmd.exe "BTC_OMNI" /K gunthy.exe BTC_OMNI poloniex
TIMEOUT /T 14
start cmd.exe "BTC_MAID" /K gunthy.exe BTC_MAID poloniex
TIMEOUT /T 14
start cmd.exe "BTC_NOTE" /K gunthy.exe BTC_NOTE poloniex
TIMEOUT /T 14
start cmd.exe "BTC_PASC" /K gunthy.exe BTC_PASC poloniex
TIMEOUT /T 14
start cmd.exe "BTC_PINK" /K gunthy.exe BTC_PINK poloniex
TIMEOUT /T 14
start cmd.exe "BTC_POT" /K gunthy.exe BTC_POT poloniex
TIMEOUT /T 14
start cmd.exe "BTC_SC" /K gunthy.exe BTC_SC poloniex
TIMEOUT /T 14
start cmd.exe "BTC_SBD" /K gunthy.exe BTC_SBD poloniex
TIMEOUT /T 14
start cmd.exe "BTC_SJCX" /K gunthy.exe BTC_SJCX poloniex
TIMEOUT /T 14
start cmd.exe "BTC_STR" /K gunthy.exe BTC_STR poloniex
TIMEOUT /T 14
start cmd.exe "BTC_STEEM" /K gunthy.exe BTC_STEEM poloniex
TIMEOUT /T 14
start cmd.exe "BTC_SYS" /K gunthy.exe BTC_SYS poloniex
TIMEOUT /T 14
start cmd.exe "BTC_VRC" /K gunthy.exe BTC_VRC poloniex
TIMEOUT /T 14
start cmd.exe "BTC_VTC" /K gunthy.exe BTC_VTC poloniex
TIMEOUT /T 14
start cmd.exe "BTC_XCP" /K gunthy.exe BTC_XCP poloniex
TIMEOUT /T 14
start cmd.exe "BTC_XRP" /K gunthy.exe BTC_XRP poloniex
TIMEOUT /T 14
start cmd.exe "BTC_XEM" /K gunthy.exe BTC_XEM poloniex
TIMEOUT /T 14
start cmd.exe "BTC_XMR" /K gunthy.exe BTC_XMR poloniex
TIMEOUT /T 14
start cmd.exe "BTC_XPM" /K gunthy.exe BTC_XPM poloniex

14

General Discussion / Re: Gunbot 3.3 - SMART edition: Windows/Linux/MacOs/armv6/armv7 - Release name "Sato

« on: July 02, 2017, 01:39:53 AM »

well you probably got a license by now, but for anybody looking for a Link to buy it just go here :

https://thecryptobot.com

And all the pieces will fall in the right place

Cheers and Plus Profits !

15

Technical Support & Development / Re: Get RANDOM api key and secret in GunBot (+3.3)

« on: June 06, 2017, 04:21:07 PM »

I am testing it atm, causes IP nor API the trouble. For connections > 7/sec = no doubt, dont do it 

@liviuv : did u tested same API Key with different IP's?

BTW i am testing socks proxies but results are not clear yet.

I did try to use a VPN with USA IP's, on my windows VPS ... but nothing seems to change sadly ..

16

Technical Support & Development / Re: Get RANDOM api key and secret in GunBot (+3.3)

« on: June 05, 2017, 05:06:13 PM »

people said that having multiple api keys can reduce the 422/429 erros that come from Polo ..

From my experience this is FALSE as it is all related to the IP and requests per IP .. but to let people test it out, i wrote that code for Random Api Keys.

17

Technical Support & Development / Get RANDOM api key and secret in GunBot (+3.3)

« on: June 05, 2017, 03:37:10 PM »

// * 1. GENERATE API KEYS IN POLONIEX
// * 2. GIVE GUNTHAR THE NEW API KEYS (public key / not secret key)
// * 3. ADD THE FOLLOWING LINES TO ALLPAIRS-params.js

/////////////////////////////////////////////////////////////////////////////////////////////////////////

// *** IN THE TOP of ALLPAIRS-params.js
var randrreturn = ['api1', 'api2', 'api3', 'api4','api5'][Math.floor(Math.random() * 5)]
var objapilist = {
    'api1' : {
        'api' : 'API-KEY-1',
        'secret' : 'API-SECRET-GOES-HERE'
    },
    'api2' : {
        'api' : 'API-KEY-2',
        'secret' : 'API-SECRET-GOES-HERE'
    },
    'api3' : {
        'api' : 'API-KEY-3',
        'secret' : 'API-SECRET-GOES-HERE'
    },
    'api4' : {
        'api' : 'API-KEY-4',
        'secret' : 'API-SECRET-GOES-HERE'
    },
    'api5' : {
        'api' : 'API-KEY-5',
        'secret' : 'API-SECRET-GOES-HERE'
    }
};
/////////////////////////////////////////////////////////////////////////////////////////////////////////

// *** IN THE var config = { ADD the following lines

    //---POLONIEX RANDOM API key and secret
    POLONIEX_KEY: objapilist[randrreturn]["api"],
    POLONIEX_SECRET: objapilist[randrreturn]["secret"],

18

Technical Support & Development / Re: Problem: Gunbot buying too many. (Patch Fixes #2021 - v3.2 )

« on: May 17, 2017, 02:06:07 AM »

The response that comes back from polo does not contain the buy order .. that's why .. and the bot keeps buying .. happened to me with DOGE .. had all my btc trapped in it .. but I got out with profit .

19

Beginners & Help / Re: WINDOWS TUTORIAL FOR GUNBOT - VIDEO

« on: May 12, 2017, 11:25:06 AM »

Thanks for the video, but I suggest you to change your API secret & key....they are clearly visible in the first video.

the account / api secret / api key - are just for demo lol 

20

General Discussion / Re: Testing Strategies - Two sets of bots running 8 pairs for a week

« on: April 12, 2017, 10:32:46 PM »

so in the long run .. profitability is most important .. so what's best to use ? 1000trades or supergun ?