Messages

1

General Discussion / Re: Tradingview information

« on: December 28, 2017, 01:27:46 AM »

another question, when there is a strategy configured in gunbot, and this strategy is running and also you put the tradinview and it is enabled. What's up? Does the gunbot stop and only works with tradinview? or do the 2 things work at the same time? because when I give to enable the bot is paralyzed. We did not know what works or one thing or the other. This is so?

2

General Discussion / Re: Tradingview information

« on: December 28, 2017, 01:19:03 AM »

there is no way to do any wiki or tutorial to install the tradinview? because where you showed me it says how to configure in the tradinview page but it does not say how to configure in the bot, it gives multiple errors and nobody has been able to solve it, ask about it and nobody has been able to install it either. It's a shame

3

Technical Support & Development / Re: Gunbot 7.0.2 How to use 2 exchanges in the same bot?

« on: December 27, 2017, 11:22:55 PM »

the way I did it if it works
first you change the port to config for 6001

the second is to create the bat file with the instruction that mentions
you put that .bat in the bot directory
you execute it, then you enter the gui but in port 6000
you do all the bot's settings, you save it

then you run the gunty.exe

there the console opens showing the statistics of the bot
only since gunty.exe works

from the gui you do not have to give it to run because it will always open port 5000

I hope you have understood what I wrote
and thanks to you for the help

4

Beginners & Help / Re: TradingView add-on support only three exchanges?

« on: December 26, 2017, 08:53:46 PM »

compatible con bittrex poloniex kraken bitfinex

no es compatible con binance y criptodia

5

Beginners & Help / Re: GB 7.0.2 not selling

« on: December 26, 2017, 08:53:01 PM »

friend, I have the same problem, have you been able to solve?

6

Technical Support & Development / Re: 2 instances of gunbot !?

« on: December 26, 2017, 08:46:40 PM »

have you managed to open it from guntthy-gui.exe
try to change the port with a bat but I can enter the graphical interface, when giving rum wants to connect to port 5000
and this port 5000 is already in use by the first bot

7

Technical Support & Development / Re: Gunbot 7.0.1 How to use 2 exchanges in the same bot?

« on: December 26, 2017, 08:21:32 PM »

I put multiple instances in the same vps. One for poloniex another for bittrex. The poloniex bot I put it normally. Now in the bittrex folder, change the port to the config from 5001 to 6001


“ws”: {
“port”: 6001,



Then create a bat file in the bittrex bot directory

set PORT = 6000

gunthy-gui.exe

with that data, inside the bittrex directory I execute the .bat file
the console opens that says it now uses port 6000
login to the page http://127.0.0.1:6000

I do all the coin configuration, but when I give it to RUN it tries to connect to port 5000 instead of port 6000
what am I doing wrong?

8

Technical Support & Development / Re: Gunbot 7.0.1 How to use 2 exchanges in the same bot?

« on: December 23, 2017, 05:16:57 PM »

thank you for the answer, I will try to follow these steps to see how I am doing and I report the results here.
The next steps will be to open another folder with different gunbot to the pole and there will configure the bittrex account.
trying to change the port, hopefully it works

I thought that in the same gunbot you could put multiple accounts, maybe changing the port, but I'll try what you tell me

thank you, I already communicate the answer

regards

9

Technical Support & Development / Re: Gunbot 7.0.1 How to use 2 exchanges in the same bot?

« on: December 23, 2017, 02:35:13 PM »

Which option would be the easiest to follow? I would like to be able to use another port for the second exchange

10

Technical Support & Development / Gunbot 7.0.2 How to use 2 exchanges in the same bot?

« on: December 23, 2017, 04:43:09 AM »

I was looking for the forum and I could not find information.

How to do to use 2 exchanges, for example poloniex and bittrex in the same bot?
I have seen that packages with several licenses are offered, but nowhere is it explained how to make the 2

install an extrategia for bittrex and another extrategia for poloniex with your currency pairs
when you go to dashboard you press in preview and then in run
the exchange works well
when I'm going to put the second exchange, again dashboard preview then run
the first exchange stops working and now the second one works
I go to setup I look for the first exchange and I make it work but now the second one stops doing it

that is, the 2 exchanges can not work at the same time
or works poloniex or works bittrex
the 2 at the same time do not work

what am I doing wrong?

Thanks in advance

11

Beginners & Help / Re: ExQ's Tradingview Setup Guide & Noobconfig

« on: December 15, 2017, 03:59:12 PM »

What are the steps to follow to configure tradingview in the xt 602 version?

This is what I understand

1 create an account with pro membership in tradingiview
2 activate tradingview in gunbot xt by putting mail and password
3 activate in the gmail oapciones so that the bot can work
4 set the currency pairs in tradingview and a strategy to buy and sell
5...? What am I forgetting? or what is missing?

Thank you

I want to have everything very clear before the installation

12

General Discussion / Tradingview information

« on: November 26, 2017, 06:52:19 PM »

Does anyone know what tradingview is for? we have all seen that it is a plugin of gunbot, we also use tradingview, but how does tradingview with gunbot work? There is not much information, in the wiki it hardly mentions it. Is there an example or place to know more about the topic?

13

Technical Support & Development / Re: Constructive ideas for TA use in Gunbot

« on: November 26, 2017, 06:42:46 PM »

I've noticed that in the xt version you can not share vps. For example I have a gunbot and my brother has another gunbot and we have it in the same vps. With a new version does not let you use the vps since it is a gunbot for a pc.
I also see that the version xt you can add more licenses but other exchanges, my brother and I 2 use polonieix, this would not be a problem if one of the 2 used bittrex, but as we use the 2 poloniex we can not put 2 times a poloniex key and this is somewhat annoying since with version 332 if I left you. Please make it possible to put 2 exchanges of the same face in a single gunbot

14

General Discussion / Re: bittrex policy change

« on: November 25, 2017, 05:38:33 PM »

https://support.bittrex.com/hc/en-us/articles/115003004171

bittrex will change its way of putting orders of sale and purchase, that affects the pre-established in the gunbot
only a new version of the bot will fix it correcting the way to put orders. but the previous versions will no longer work. This is what I understand of that mail. Can someone correct me?

15

General Discussion / Re: bittrex policy change

« on: November 25, 2017, 04:38:52 PM »

bittrex will change the way to put the orders of sale and purchase
when it does all the gunbot will stop working for bittrex
bad news for those who love version 332

16

Technical Support & Development / Re: Help with error 403 on Amazon AWS Windows 2012 - Unable to run bot at all

« on: November 16, 2017, 07:14:18 PM »

Same problem here

17

General Discussion / Re: No support for 2 weeks now, not sure what to do

« on: September 26, 2017, 06:04:37 PM »

Already activated the license? I have a friend who has been with the process for 2 weeks and there is no news, how much longer can it be? the normal licenses activate them to the minutes but these take weeks?

18

General Discussion / Re: Gunbot v5.0.4 - Poloniex/Bittrex/Kraken/Cryptopia - Core Edition - AllOs_x64 wit

« on: September 25, 2017, 05:35:55 AM »

virustotal has over 20 antivirus to scan
please do it yourself to leave doubts


using the bot in a vps would make it harder to track who is stealing data
the bot has the data api key and api secret of each one
in addition to taking passwords from our computers

19

General Discussion / Re: Gunbot v5.0.4 - Poloniex/Bittrex/Kraken/Cryptopia - Core Edition - AllOs_x64 wit

« on: September 25, 2017, 05:04:25 AM »

google the virus
it's a ramsoware
has a keylogger



I did the same with the version 3 3 2
with this result

20

General Discussion / Re: Gunbot v5.0.4 - Poloniex/Bittrex/Kraken/Cryptopia - Core Edition - AllOs_x64 wit

« on: September 25, 2017, 04:50:31 AM »

download from here
https://github.com/GuntharDeNiro/BTCT/releases/download/V504/GUNBOT_V5_0_4.zip







I decompress and then upload the gunthy.exe file to this virus page and scan it

prove it please

https://www.virustotal.com/es