Messages

101

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3 in less than 5 minutes (linux)

« on: June 02, 2017, 09:46:12 PM »

Thank you for your efforts, it works great! Is it possible to start a second instance, let's say with another API ?

Not with that version, no. But I'm working on v2

BK

102

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: June 01, 2017, 03:06:44 PM »

I've updated the monitor
Version 0.0.25

Changelog

-    Default timing is 60s now.
-    Handle "EMFILE: too many open files, scandir".
-    Added profit behind the --profit (-P) flag.
-    Highlight 429 errors.


Update

Run

Code: [Select]

npm install -g gunbot-monitor to update/install it on your server.


Profit is back

You can activate the profit parsing again with the parameter '-P'.

Code: [Select]

gmon -P
THIS WILL SLOW DOWN YOUR SYSTEM. Please check your CPU load and increase the refresh time if the CPU load is to high, or do not activate the profit parsing.


Usage

All available options can be displayed with

Code: [Select]

gmon -h


Code: [Select]

  Usage: gmon [options]

  Options:

    -h, --help               output usage information
    -v, --version            output the version number
    -p, --path <path>        Path to the GUNBOT folder
    -c, --compact            Do not draw row lines
    -s, --small              Reduce columns for small screens
    -r, --refresh <seconds>  Seconds between table refresh. Min = 10, max = 600
    -P, --profit             Use to activate the parsing of the profit. I WILL SLOW DOWN YOUR SYSTEM!

You can also combine the options like:

Code: [Select]

gmon -csPr 120 -p /path/to/GB/
BK

103

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3 in less than 5 minutes (linux)

« on: June 01, 2017, 01:02:01 PM »

How to change bot settings without stopping bot and loosing it data. I want lower BB

I edited All pakrs file but think it didnt update it.

It looks like the config update does only work with the configs of the pair, not with ALLPAIRS

BK

104

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT in less than 5 minutes (linux)

« on: June 01, 2017, 08:13:19 AM »

I want to have that monitor working on my VPS, but i have this problem

Please use this thread to get help about Cryptowally's gunbot linux console:
https://gunthy.org/index.php?topic=261

BK

105

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: June 01, 2017, 08:08:01 AM »

How to adjust delay? 10s is too low, i'd like it to be more sparse.

Hi,

use the '-r' parameter:

Code: [Select]

gmon -r 60

All available options can be displayed with

Code: [Select]

gmon -h

Code: [Select]

  Usage: gmon [options]

  Options:

    -h, --help               output usage information
    -v, --version            output the version number
    -p, --path <path>        Path to the GUNBOT folder
    -c, --compact            Do not draw row lines
    -s, --small              Reduce columns for small screens
    -r, --refresh <seconds>  Seconds between table refresh. Min = 10, max = 600

You can also combine the options like:

Code: [Select]

gmon -csr 120
BK

106

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT v3.3 in less than 5 minutes (linux)

« on: May 31, 2017, 07:57:58 PM »

Update for version 3.3

To update follow these steps:

1. Login to your server.
2. Run this update script

Code: [Select]

cd
curl -qsL https://raw.githubusercontent.com/BeerK0in/generator-gunbot/master/update.sh | bash --3. Run 'ginit' again to start all bots with delay

Code: [Select]

gcd
ginit4. Press ENTER for every question (it will use your last settings)
5. [optional] Press ENTER on the conflict of ALLPAIRS (*)
6. Wait till all bots are started.
7. [optional] If you have changed some configs manually, please copy them from the backup folder back into the gunbot folder:

Code: [Select]

cp /opt/gunbot-backup-<NUMBER>/poloniex-BTC_XXX-config.js /opt/gunbot/8. Controll with 'gl' or 'gmon' if all bots are running. If not enter 'gstart BTC_XXX' to start the stopped bot


(*) The conflict could happen if you have an older version of the generator, because the default settings have changed a bit. In that case it is very likely you see this question. Just press ENTER:

Code: [Select]

conflict ALLPAIRS-params.js
? Overwrite ALLPAIRS-params.js? (Ynaxdh)

BK

107

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 30, 2017, 09:32:56 AM »

I've updated the monitor
Version 0.0.22

Run

Code: [Select]

npm install -g gunbot-monitor to update it on your server.



Small screens

You can run the monitor on small screens now with the parameters '-c' or '-s' or both '-c -s'.

Code: [Select]

gmon -c

Code: [Select]

gmon -s

Code: [Select]

gmon -c -s

108

Technical Support & Development / Re: Bugs/Issues tracker v3.2

« on: May 28, 2017, 11:42:57 PM »

Buying and Poloniex error 422 result in less log output
(gunthy-linuxx64 binary from the GUNBOT_v3.2_GUI_edition_all_CPU on ubuntu 16.04.)

Looks like it is the combination buying and any error results in less log output and also no trades.

Another user in the Telegram chat had this problem because of an error of insufficient BTC:
(on Ubuntu 16.04.)

Buying and error

Code: [Select]

2017/05/28 07:54:02 [ --2017/05/28 07:54:02--poloniex--BTC_AMP  --  Gunbot v3.2 cycle #709 --------------- ]
2017/05/28 07:54:02 ::::: collecting market data...
2017/05/28 07:54:02 ***************************************************
2017/05/28 07:54:02 Low BB:0.00010209 - High BB:0.00010785
2017/05/28 07:54:02 ***************************************************
2017/05/28 07:54:05 LP 0.00010329  Bal.BTC 0.00253843  Bal.AMP 0(0)
2017/05/28 07:54:05 No open orders
2017/05/28 07:54:05 boughtPrice undefined
2017/05/28 07:54:05 price  falls (-2)
2017/05/28 07:54:05 PriceToBuy,1.0353,priceToSell,--not set--
2017/05/28 07:54:05 LP 1.0329000,<=,prBuy 1.0352849  secMargin 0.000041411394891158713  grows yes
2017/05/28 07:54:05 no altcoins: 0
2017/05/28 07:54:05 price to buy: 0.00010352848722789678
2017/05/28 07:54:05 price is sweet to buy
2017/05/28 07:54:05 price is growing
2017/05/28 07:54:05 Buying on poloniex 24.576257575757577 of AMP for 0.00010329
2017/05/28 07:54:07 2017/05/28 07:54:07 Error: Not enough BTC.
2017/05/28 07:54:07 !!! Cycle 710 failed. Will repeat in 30s
2017/05/28 07:54:37 [ --2017/05/28 07:54:37--poloniex--BTC_AMP  --  Gunbot v3.2 cycle #710 --------------- ]
2017/05/28 07:54:37 ::::: collecting market data...
2017/05/28 07:54:37 ***************************************************
2017/05/28 07:54:37 Low BB:0.00010208 - High BB:0.00010785
2017/05/28 07:54:37 ***************************************************
2017/05/28 07:54:39 LP 0.00010329  Bal.BTC 0.00253843  Bal.AMP 0(0)
2017/05/28 07:54:39 No open orders
2017/05/28 07:54:39 boughtPrice undefined
2017/05/28 07:54:39 price  falls (-2)
2017/05/28 07:54:39 PriceToBuy,1.0353,priceToSell,--not set--
2017/05/28 07:54:39 Gunbot callback at 2017/05/28 07:54:39 cycle # 710
2017/05/28 07:54:39 Callback:
2017/05/28 07:54:39 ---------
2017/05/28 07:54:39 Waiting for orders: 0 AMP
need faster: yes
need slower: no

2017/05/28 07:54:39 next delay will be 30s

From now on till a restart of the bot, the log looks like this:

Code: [Select]

2017/05/28 22:10:24 [ --2017/05/28 22:10:24--poloniex--BTC_AMP  --  Gunbot v3.2 cycle #2279 --------------- ]
2017/05/28 22:10:24 ::::: collecting market data...
2017/05/28 22:10:25 ***************************************************
2017/05/28 22:10:25 Low BB:0.00008968 - High BB:0.00009935
2017/05/28 22:10:25 ***************************************************
2017/05/28 22:10:27 LP 0.00009414  Bal.BTC 0.00597332  Bal.AMP 0(0)
2017/05/28 22:10:27 No open orders
2017/05/28 22:10:27 boughtPrice undefined
2017/05/28 22:10:27 price  falls (-1)
2017/05/28 22:10:27 PriceToBuy,0.9209,priceToSell,--not set--
2017/05/28 22:10:27 Gunbot callback at 2017/05/28 22:10:27 cycle # 2279
2017/05/28 22:10:27 Callback:
2017/05/28 22:10:27 ---------
2017/05/28 22:10:27 Waiting for orders: 0 AMP
need faster: yes
need slower: no

2017/05/28 22:10:27 next delay will be 30s

BK

109

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 28, 2017, 10:59:16 PM »

Sorry, I disabled email notifications on github, so I was unaware of all the issues and the PRs here.

Thanks to Svenson there is a new version out.

110

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 28, 2017, 06:51:00 AM »

Is there a reason as to why some prices in the last price column for pairs are blank and others are not?

https://gyazo.com/d664c58af15772b5855447030ade4ce5

General answer: if the GUNBOT does not log something, the Monitor can not show it.

In your case a line like this is missing in the logs:
LP 1.7650000,<=,prBuy 1.7715878  secMargin 0.0000708635135333334  grows yes

This is not confirmed by Gunthar, but I think it is when the GUNBOT is in a bad state after an error on Poloniex. See this post in the Bugs thread.
https://gunthy.org/index.php?topic=270.msg1570#msg1570

I also noticed, the bots will not trade if 'last price' is empty, so I restart them (and wait ~10s between each restart):

Code: [Select]

pm2 restart BTC_XXXI'm not sure if restarting is the correct way to address this, but it works for me.

BK

111

General Discussion / How long do you hold your bags

« on: May 27, 2017, 12:03:47 AM »

Hey,

when the GUNBOT buys coins and you have bad luck and the price falls by 20% to 40%.
Than in this lower price area the price goes up and down as always, but you still holding this bag - how long till you sell with a loss to be able to trade with that pair again?

BK

112

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 26, 2017, 11:00:25 PM »

Windows 10 with putty 0.66

Looks like putty uses a non UTF-8 font by default. Maybe this helps you to switch to a more modern font: https://superuser.com/questions/393834/how-to-configure-putty-to-display-these-characters

BK

113

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT in less than 5 minutes (linux)

« on: May 26, 2017, 07:34:53 PM »

I am getting this errors. What I am doing wrong?

For the current version of the generator, you need to be root user.

BK

114

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 26, 2017, 07:24:52 PM »

i'm using ubuntu 16.04

Could be the Terminal software you are using to connect to your server. What is the OS on your local machine and how (which program) do you connect to your server?

BK

115

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 26, 2017, 07:18:20 PM »

i'm using ubuntu 16.04
nodejs v7.10.0
still same thing even after update...

Can you go to the folder your GUNBOT is installed and run those commands and post the results here?

Code: [Select]

npm ls -g pm2 gunbot-monitor

Code: [Select]

free -m

Code: [Select]

ls -la *-log.txt
BK

116

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 26, 2017, 05:41:03 PM »

is possible to execute GM in log in html ---> example    $ gmon html
in my browser view GM with 20sec refresh.......

Right now out of the box: No, all the output is formatted for the console and not written into a file.

I could build a sweet webapp to view and control the bot. But that would took time from my other projects and I would have to charge money for it.
So if there is a big demand and more than 20 people would pay, lets say 0.05 BTC for it, then we can go into the web.

BK

117

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 26, 2017, 03:44:55 PM »

I've updated the monitor.

Run

Code: [Select]

npm install -g gunbot-monitor to update it on your server.

Few improvements i would suggest

Added hopefully all of it. Can you check the arrows again please?

Wonderful idea! But it doesn't run on Windows now)) I'm working in Linux, but bot runs on Win machine.

I also have a few windows servers I am running pairs on. Any plans on getting this amazing monitor working with a windows server?

i can't make it work... i get only logo >>gunbot-monitor<< and refresh interval 20s and it stays like it forever...

Should work on Windows and OSes other than Linux and OSX now.

Do you have a LTC wallet I can send something to?

I do. LTC wallet: LNwLXuf9Ry47n3GiFc4cGTBXLLX1Cov6Ha
Thank you!

BK

118

Beginners & Help / Re: Gunbot Monitor - Oversee all GUNBOTs in one screen

« on: May 25, 2017, 11:29:50 PM »

But it doesn't run on Windows now

I think I found the issue with Windows. Will look into it tomorrow.

This is amazing dude, have been using it for 2 days now and couldn't imagine GB without it. Great job!

Glad you like it.

Few improvements i would suggest:
- on the "diff since buy" column add a total at the bottom also.
- I dont know why but the pink arrows and the blue arrows show just squares to me. the yellow arrows are ok though!
- put profit column green? Today was a bad day... just saw reds on the  "diff since buy" so a little green would cheer us up?
- On "last error" the idea is "If a 422 only shows up once in a while is ok, but if it blocks a pair that is bad" so can we also see (what time was the error before the last?) understandable? Or X errors in the last Y minutes? Just basically something that would help on identifying if it was a one-off error or a persistent one.

Thank you for the feedback. I put it "on the list"

Arrows: What OS are you running GUNBOT on? Debian? Ubuntu? CentOS?

BK

119

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT in less than 5 minutes (linux)

« on: May 25, 2017, 09:40:55 PM »

how to clean this list?

Code: [Select]

pm2 delete all

Are there any updated defaults I should be aware off? I only updated the gunthylinuxx86 and restarted everything.

No, I don't think so. Just updating the binary file(s) should do the job. So I think you good to go. Actually I used the update script on my to main accounts and all it does is replacing the binarys, and everything runs like it should be.

Is there a way to start pairs with different API keys? I do not use the same API for all my pairs.

Actually not without editing your configs manually. I started this as a option for people who just started using GUNBOT and just want to get it running - as this were also my first steps into it.
I do also use multiple API-Keys now and ended up in having 2 Server. But I'll add this use case to my list of features for the next version.

Can I also import my own config files and how would I start.

Ok, it could work that way:
1. You create all the config files with 'ginit' and set one of your API keys there.
2. You do not start any trade pair.
3. Now all your settings are in ALLPAIR and all of your selected pair configs are empty.
4. You can now copy your own config files and replace the created ones or edit the created files and just add the different settings you want for that pair compared to ALLPAIRS.
5. At least add the API key and secret to the config files of the trade pairs which you want to use another key than in ALLPAIRS.
6. When you done, run 'ginit' again, in the last step, select all pairs you want to start and than press 'n' on every conflict the generator is presenting you. So let it not overwrite your files.

Now ginit should start all of your bots. I did not try that, but I think it will work that way.
If not, do all of the abouve staps, including step 5 but than run

Code: [Select]

pm2 start ./gunthy-linuxx64 --name BTC_XXX -- BTC_XXX poloniexfor every pair you want to start. delay every start by ~10 seconds.

BK

120

Beginners & Help / Re: Generator-Gunbot - Setup GUNBOT in less than 5 minutes (linux)

« on: May 25, 2017, 08:01:06 AM »

How to start it on Bittrex? I already put api keys in config. Then what?

Can manually start it on bittrex?

The generator only supports Poloniex at this moment.

You can always go the manual way and set the configs manually and than use this to start a bot.

Code: [Select]

pm2 start ./gunthy-linuxx64 --name BTC_XXX -- BTC_XXX bittrex
But do not use 'ginit' or 'gadd', bacause it will remove your bittrex or kraken API credentials from ALLPAIRS.