Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - criptonauta

Pages: 1 [2] 3 4
21
General Discussion / My first results with Gunbot 4.0.1 patch #4013
« on: August 13, 2017, 07:12:43 PM »
Hello Guns!

Last night I began running GB 4.0.1 in a test account with 0.25.

Choosing only one pair.

First pair was BTC_XMR, default settings?

The results:



I chose a new pair. This time, AMP.

Taking into account Gunthar's words when he released 4.0.1, and considering that I'm a co-founder of Gunbot University - GBU, I did my mods :) 



Some tweaks in settings and here are the results (!!):





Result:
Two trades, 0.25 each.

Total gain in the whole balance today:  22.72%

Having reached more than 7 times of my daily goal, now I can do other things. Tomorrow I'm back :)



22
General Discussion / Re: Error 442
« on: August 08, 2017, 03:21:45 AM »
I've got the same error for a few days now. Not a single Cycle comes through.
I'm using Generator-Gunbot and the Monitor. I've tried on multiple servers, everywhere the Error  442.

Can anyone help?

Hi jaNGO

If you are using any version below 3.3.3 you will need the Gunbot Proxy Community Edition to skip the errors and trade again - link is https://github.com/taniman/gunbotproxycommunity/releases. Easy to install, can be used with later versions to take advantage of the anti dust feature. Consider donating to Elroy (Proxy Dev) if it's useful for  you :)


23
General Discussion / Re: 3.3.5 GUI?
« on: August 05, 2017, 01:40:29 AM »
Are there any options for a GUI on 3.3.5?

In development. It'll be available with 3.3.6 that also includes bugfixes of what was detected in 3.3.5.

24
Technical Support & Development / Re: HELP! Error 500
« on: August 04, 2017, 02:29:02 AM »
Hello All,

Just installed my Gunbot Version 3.3.2

I am getting Error 500 after almost every cycle

I have the proxy installed which got rid of most of the error 422

Not sure what to do. Any help would be appreciated.

Thanks


Hi

Error 500 is when there's a problem to access Polo website, mostly because it's down. If you get error 500, other users will be getting them as well. This one, unfortunately, cannot be handled by Gunbot.

25
Beginners & Help / Re: Gunbot 3.3.2 -> Windows vs Linux
« on: July 29, 2017, 02:28:33 PM »
Also, since most add-ons now need to be re-factored to 3.3.4, operations  in Linux got back to manual mode at least for a while. In this sense, and also considering the new version consume considerably less resources, Windows has the advantage for now.

Another point is that you can access Linux resources while in a Windows environment through the use of tools like Cygwin, so you can take advantage of both systems :)


26
Beginners & Help / Re: USDT Pairs on 3.3.4 ?
« on: July 29, 2017, 01:34:43 PM »
Hi, just wondering if someone know what to put in :

"BTC_TRADING_LIMIT":
"MIN_VOLUME_TO_BUY":

When you trade USDT/ETH for exemple ?

The normal value didn't work and use all my usdt

Hi loł51


When primary coin is not BTC, BTC_TRADING_LIMIT is the new primary coin, USDT in your case,

BR

Criptonauta

27
General Discussion / Re: A couple of questions about buying a license
« on: July 28, 2017, 03:21:58 AM »
Hi,
I bought a License through re seller, how I can know If my API KEY its registered with my name/email ?

Regard

Hi Agustin

You can verify it directly with Gunthar. If it's your exchange account, you control the API. As a last resort, you could also contact Gunthar to revoke your previous API and activate a new one.

If you bought it from an official reseller, rest easy. If it's a second-hand license, just take steps above.

Best regards

28
General Discussion / Re: A couple of questions about buying a license
« on: July 19, 2017, 02:18:43 AM »
Hello MidnightOne


Quote
1. I'm trading on polo, thay now have a lot of captchas for page refreshing, will the bot have any problems maintaining connection?
Nope. All trades and data sent or received is made by using APIs. After you have your Polo API generated and the licensed by Gunthar, you insert it in Gunbot gui or file and it's done.

Quote
2. What escrow to use when buying secon hand license?
For second hand licenses, it can be escrowed by Gunthar himself. I'm also performing this task.[/quote]

Quote
3. To verify a license, I need to PM Gunthar directly?
Correct.
The first thing is to inform Gunthar the previous owner API so he can verify if it's legit or not. Being legit, the escrow phase take process. With money received, the new license is activated.


Best regards,

Criptonauta

29
Beginners & Help / Re: GUNBOT V3 FOR MAC OS X
« on: July 10, 2017, 04:29:25 AM »
Hello I'd like to buy a copy for Poloniex MacOS - please reply here or my telegram is @thekingofpumps (I cannot message you at the moment)

Hello Derejrcar

Gunbot is available for all systems in a single package. Message Gunthar here or in Telegram @GuntharDeNiro to acquire your license.

Best regards

Criptonauta

30
Technical Support & Development / Re: undefined errors
« on: July 10, 2017, 04:25:03 AM »
Hi

Where you are setting the pairs, I can see:

BTC / sc

it would be BTC / SC



The problem is, indeed, the pair in lower case.

Make sure you save the new settings prior to run the pair.


31
Technical Support & Development / Re: undefined errors
« on: July 10, 2017, 03:51:17 AM »
Hi,

The image is quite hard to read due to its size, but it appear you've typed the pair in a wrong way

It's BTC ETH in capital letters.

Check this and try again.


Best regards,


Criptonauta

32
hi

i  would like to know how to uninstall this?

npm -g uninstall gunbot-monitor

33
Hello Kiwi

Community here is somewhat more open to share, but you will also see settings being sold as well as nice apps and consulting services. Some settings are openly shared as well as solid info about GB workings and extensions, like the Gunbot Monitor, GunControl, Gunbot Community Proxy, Polo/Trex pollers, etc. Gunbot is a growing ecosystem and we still have much to be seen.

Quote
1.which is the best suited exchange to run the bot on. i have both bittrex and polo accounts
Polo is Polo... many dislike it due to the errors and other reasons, but it still offers a huge volume. Bittrex has been surprising us, with crescent volume and interesting coins. I try to keep my portfolio split between the two while other exchanges are still not available (they'll be soon), but recently Trex has been performing better than Polo.

Quote
2. this bot can run on windows and Linux. which is the best OS for It. i hvae better experience with windows then linux
I was a Windows user and do not regret using Linux since some 2.x version. It seems scary but it's quite user friendly. It allows more customization than Windows, also many Linux features can be also accessed by a Windows computer.

Quote
3. assuming question one best change is X who can i buy the Bot from ?
You can buy directly from Gunthar or from one of the official resellers, which I'm one of them. If you'd like a 10% discount in your licenses, just inform the code 'Criptonauta_Gun'  when purchasing them :)

Quote
4. Who knows this bot inside out and can setup for optimal performance ?
Other than Guntar himself? Tough question :)
There are several Gunbot Tweakers around, that have been dealing with each variable of Gunbot since SuperGun version, and I must say there still a lot to learn, since Gunbot develops in a fast pace with new features and solutions, in a joint-force between Gunthar and the Gunbot Community.

It's based i this premise - to know Gunbot better and better to deal with the different aspects it offers, that some of us joined forces to create Gunbot University.

In this project. we currently offer

- access to our telegram chat now
- 6 professors available daily spanning UTC -8h to UTC+2h (I'm one of the professors)
- expert assistance with Gunbot
- config's, tools, setup, tweaks
- analysis and market changes
- one on one scheduled assistance available
- basically, get your Gunbot working within a day!
- when we launch our service, first month is included free
- weekly live sessions that teach crypto, exchanges, coins, and of course, Gunbot deep dives

We don't sell settings but rather give you all settings we have and continue to help you understand and tweak your settings. We show you our results. We explain everything we know and help test and troubleshoot with our servers.

Since we are in beta, we are closing the group when we complete 25 members. It'll will be great to have you as a member.

Quote
5. when can we start
Whenever you are available. Just PM me here or in Telegram.

Best regards,

Cripto

34
Beginners & Help / Re: I need help (Node Error?)
« on: July 06, 2017, 06:43:30 PM »
Hello

Everything is normal. BB is calculating and it needs time that varies according to the settings you are using.

While BB calc is not completed, GAIN is in charge, so rest easy, it'll still make trades.

The async info is a message, not an error and does not affect performance.

BR

Criptonauta

35
General Discussion / Re: Upgrading to 3.3.2 - Instructions Needed
« on: July 06, 2017, 06:37:30 PM »
Hi Krixt,

Yes, restart your bots. The ideal situation is if it has no orders, but there will be no problem if restarted with an open order, since GB retains the variables in save.json.

If you re using BB, it'll need to be recalculated, but that's all.

BR

Criptonauta

36
Technical Support & Development / Re: Bugs/Issues tracker v3.3/v3.3.1
« on: June 22, 2017, 03:10:48 AM »
[UNCONFIRMED]

3.3.2 sold randomly at a loss on Polo:

*** MARKET CALLBACK | buy 172.09680509232965 LSK for 0.00058107 BTC
2017/06/05 06:56:22 *** MARKET CALLBACK | sell 171.83865989 LSK for 0.00057857 BTC
2017/06/05 11:25:54

Settings:
BUYLVL1: 0.6,
BUYLVL2: 3,
BUYLVL3: 10,
SELLLVL1: 1.9,
SELLLVL2: 4.5,
SELLLVL3: 7,
BUY_STRATEGY: 'STEPGAIN', // accepted values BB or STEPGAIN or GAIN or PINGPONG
SELL_STRATEGY: 'STEPGAIN', // accepted values BB or STEPGAIN or GAIN or PINGPONG


And it's still doing double buys on Bittrex
EDIT: no more double buys since I switched VPS from Amazon to Contabo

I have the same and I'm almost sure it happens when some of buy lvls are below 2%.

37
General Discussion / Re: Hello from newbie
« on: June 09, 2017, 11:59:33 AM »
Hi anarcoteh ^^

First of all, welcome.

I came firstly to reply your email because you dmeonstrate an interest about GB more than 'what coins to choose' and also because of a point that worried me.

Quote
1) I'm running gunbot 3.3 smart edition on my Windows Server 2016 VPS. Would anyone recommend NOT doing this?
Why not going directly to Linux? As an ex windows user I can say it only appears 'scary' but it's quietly friendly, at least for Gunbot.
Servers suffer less load and are easy to deply, espacially now with so many custom tools available. Your control panel will be much suited to your own style than the win GUI, that needs to take everyone in consideration. Linux is always the first OS to receiva e release and to have bugs fixed. Also, in many VPS providers, they also charge extra for a win server. So, in my opinion, you could at least give Linux a test drive in a virtual machine to feel it. ^^

Quote
I have 2 trading accounts, one a polo and one at Kraken. In the Kraken account I have about 0.3BTC. In the Polo account I have about 14BTC. I was planning on starting on the Kraken one and just seeing how it worked, before letting it loose on the Polo account. Does anyone think this is pointless/rubbish strategy or sensible?
I consider myself as GB tuner and with many other comrades, have being making some good trades. I have the three licenses since the release of the 2 exchanges and yesterday I just 'retired' from Kraken since it presents a series of disavantages if compared to the other two. If Polo has errors, so has Kraken and with an annoying frequency. It's interface is totally unfriendly bt perhaps it's API may be yet worse. In Polo or Trex, for example, if your accounts has a pening order, it's correctly informed by the API, and appears in Gunbot like we are used to see - alongside the amount of alt, like 1234 (2345). Kraken neither shows it to us on a screen nor to Gunbot via API, and this brings problems. The slow time compared to Polo and Trex are another great incentive for you to transfer your money from Kraken and go to test Bittrex, that has a lot of coins, fast trades, low delay and with an increasing volume.

Quote
What sort of returns can you realistically expect from continuous trading. I saw one set of charts that seemed to be showing an approximate return of about 3.5% per day, but I'm gathering that this may be a high return. What sort of daily/weekly/monthly returns are you getting from your Gunbot?
It will depend on the time you will invest piloting (or not) Gunbot. Check my [url https://gunthy.org/index.php?topic=311.0]90-day journey[/url] as an example of return with a good mount of time and study invested and also check the gains Gunthar always displays using the Default settings and in autopilot. Both are good, both are profitable.

Quote
What strategies are others using? I'm going to do some testing, and will happily post back my results here to the community.
I started a pool @ Gunthys Telegram channel and the current results are:




Salut,

Criptonauta

38
Hello Guns!

Sorry for posting the results a week later after the 90 days! Those were some very busy days and with a lot of GB related stuff to do, the post ended up postponed :/

The last time I updated, we were just before a Red Sea in cryptoworld that made me worry about the possible result of my journey. Prices dropped, I had some bags and total profit dropped to about 260% in Total E P/L and to 227 in Withdraw now...

About 3 days to reach the 90 days, I've started to unbag and it was possible to reach the main goal.

But, as I have now only the updated history, this is the one I'm sharing:





And here we can see graphically, since the hard time with the Dash experience, the recovery and up to now.



With this, the journey is over, I'm very happy with the results and I would like to thank you all of you that followed it with me!

I'll see you all in another 90 days!!!


~Criptonauta




39
I'll need a bigger discount if you wana sell the second one for 0.5!-)

Lol thanks I corrected the price to the real price of 0.05

40
How to buy? And how much 3.3 version?....

Same price as always, 0.1 for the first exchange and 0.5 each other.

You can get a 10% discount with me or other official reseller.

Pages: 1 [2] 3 4