Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - magictrade

Pages: [1] 2
1
General Discussion / New Exchange - UpCoin
« on: April 10, 2018, 11:46:54 PM »
Hello,

they is a new exchange......

it is in beta atm, but till now it looks very nice !

they want to offer 1300 pairs !!!!!

and only have 0,1 - 0,2% fees (one trade = 0,3%)

that all sounds very nice for botting, i think (;

maybe it is interesting for GB in the future ?!


here is my ref-link, maybe somebody else is interested ?!

https://upcoin.com/?ID=37737b92

2
Technical Support & Development / some infos for the wiki
« on: January 01, 2018, 06:36:59 PM »
hi,

they are some things, that i dont can find in the wiki.....

it had take much time, to find it out:


bitfinex only work with the right pairnames

i try it with that:

         "USD-IOT": {
            "strategy": "emotionless",
            "override": {}
         },


and everything dont work.

but with that:

         "USD-IOTA": {
            "strategy": "emotionless",
            "override": {}
         },

everything works (;


binance have a simular problem....

if there is an pairname not correct, the bot restarts and dont trade the pairs after the wrong one.



and some exchanges have a min. order amount, thats make problems, too

for example, i try GB with low balance on some account but becouse of the minimum order value it dont work (bitfinex, kraken).

it would be fine, if the real pairnames and min. order values write down in the wiki, too (;

3
Technical Support & Development / 7.0.2 - BUGS !!!
« on: January 01, 2018, 01:37:56 PM »
hello,


i have found some bugs.......

Kraken:

On Kraken often Errors appear, like that:
"Error: API:Rate limit exceeded"

maybe it is possible, that GB auto-retry it, after an error ?


Kraken have an very high minimum ordersize:
https://support.kraken.com/hc/en-us/articles/205893708-What-is-the-minimum-order-size

i dont know, wich value i should use for trading, becouse i have not so much balance on this account and the price is changing.......

if i trade USD-BTC, and use 20$ (0.002BTC) as trading balance...... on the next day maybe 0.002BTC are 25$.....



my BTC-??? account only starts if i choose USD-??? (in my case USD-ETH) as first pair in the config........
otherwise only "loading exchange" message appears

and GB only trades (with emotionless) on pairs that i had bought by hand, before......




Bitfinex

GB make no trades with USD-??? and with BTC-???

only this:

GBXT_v7.0.2 BTC-DATA Round # 1420
------------------------------------------------------------------------------------------------
 ɢƱƝβøͳ XT Edition  Scanning bitfinex for trading opportunities 2018/01/01 14:32:16



4
Hello,

can somebody please help me ????


i only get this for every pair:

XXMRYUSD Last Bid/Ask 0.00000000/0.00000000

5
Technical Support & Development / 2 instances of gunbot !?
« on: December 13, 2017, 06:01:22 PM »
hello together,

how can i run two instances of gunbot ?

becouse i have two accounts on kraken, one for ???/usd and one for ???/btc.

i think it is not possible to usw two accounts of one exchange with one instance ?

so i try to run two (change the ports and ip).
i can config both, at the same time, but iam not shure if they both work together, becouse if i click "run" than only in one log-window something is shown....

and only one gunthy.exe is running.......


please help me  :-[

nobody give me an answer via pm or telegram  :-\

6
Technical Support & Development / Feature Request - Selling Bot
« on: July 16, 2017, 06:02:49 PM »
Whats about an selling-bot ? for situations, like atm ?

all markets fall ):

but i think with a margin-selling-bot we can make profit, too ?!

7
Technical Support & Development / money managment
« on: July 09, 2017, 09:17:37 PM »
how do you manage you money ?

how much % of you balance to you need for gunbot ?

the last trys, i have trade for example 40 pairs on polo and have used my hole balance and split it throuth 20 (thats the value for each pair)


i do it with the idea, that, if gunbot make profit, that it can buy another pair and that are more theoretical trading possibilitys = more profit.

on the first week, it work amazing, but than the market crashes a little and gunbot bought to much "bags", that are open for weeks and block the hole balance and so gunbot can make no new trades ):

maybe that isnt a good idea, to take the hole balance or use to much balance per trade ?

and whats about reinvesting the profits ?

8
hello,

i want to test some different settings on different accouns on the same exchange(s)......

but what is a good and easy way, to analyse this ?

the last time, i have write down the estimated balances (in the majorcurrency) every day and have calculate the proft from day to day......
and i have calculated the %(profit) from the balance, with that i have start, to the actuall day....
i know, that on some days the balance goes down and so on, becouse maybe gunbot buy and the price goes down and then the price goes up and the bot sells......

i think maybe the balance only for the majorcurrency is intersting, too ?
becouse that is theoretical free to use for trades.

and maybe the amount of closed trades (in the last 24h) and trades that are still open, maybe the amount of trades, that are open (in the last 24h).

maybe the number of bags (trades that are open for x days or weeks).

ok, the classic RoI, but i think the RoI makes the same sense, like the est. balance,
both have its pros....

some ideas ? or suggestions ?

how do you analyse you settings to compare with other settings ?

9
Beginners & Help / VPS
« on: July 02, 2017, 03:49:36 PM »
hello,

i think about, to rent a vps...........

atm i use my second laptop.......

yesterday i have look for an vps, but it looks like, they are not so cheap......

i prefer windows (;

but thats not my question.....

what for a vps do i need ?

atm i trade an 6 accounts and 87+87+51+51+5+5 pairs ^^

atm they run 7 gunbots on an quadcore with 4gb ddr4 .......

what is the minimum cpu and ram, that a vps need ?

maybe it is better/cheaper, to use my second laptop or buy an small nas ?

10
Hello together........

atm the market dont look really good ?

is here somebody who make profits ?

till the "crash" gunbot have made excelent trades/profit.....

but throuth the crash, the "old problem" with the bags have make my balance very "small"..........

gunbot have bought sometimes on the top and everything go down......

and now i have much open trades, that use nearly my hole balance and in the last days gunbot make only a few trades.......

and my balance atm is under the amount, with that i have startet ):

ok, if the market go up and so, the open trades maybe will close with profit, but till that happen, gunbot can not do very much ):

the only market where gunbot work a little bit is on bittrex, with 87 pairs (;

how do you handle this ? do you make (good) profits atm ?

what do you think, how long do we need to wait, till this "crypto-crash" ends ?

i think gunbot urgent need a strategie to handle the "bags" !

yesterday i have set much orders for bags, from hand........

and i see, that gunbot sadly often have bought on the "peak of the hill" .......

is that maybe solvable, if i took a longer periode, to dedect the trend ?

MAX_LATEST_DIRECTIONS:30,
MAX_LATEST_PRICES_TREND:30,

i could cry about it ):

gunbot is so great ! but this f****** bags !!!!!

11
Hello,

here is another small suggestion.......

i try to discribe it........

if you trade (for example) only this pairs
USD/BTC
USD/XMR
USD/DASH
and so on

it logical make more sense, to say gunbot, it should buy cryptos for (example) 10$ (every trade)

the major-currency is USD !



but ! if you trade this on one account (for example):

BTC/Cryptos = BTC/ETH, BTC/XMR, BTC/LTC and so on
USD/BTC
EUR/BTC
JPY/BTC
GBP/BTC
and so on...

you theoretical have more major-currencies.....

but practical you only have BTC-balance and you want to get you profit in btc, too.......

the thing ist you need to set a BTC-value as "balance per trade/pair" for all the BTC/Crypto pairs.......
and you need to setup an fiat-value for every! fiatpair.....
but the price is changing and you want use BTC as reference....

in this case, it where be fine, if you can tell gunbot "my majorcurrencie" is BTC and i want to trade with 0,1BTC for every trade.....

so that gunbot sell 0,1BTC for USD( or EUR or GBP or JPY and so), if the price is high and buy BTC für the fiat-balance, if the price is low.....

and if you start that the first time, the fiatbalance in the console is "NaN".......
maybe it is possible, that gunbot in future can handle it on his own !?


12
General Discussion / search for an "balance" overview tool
« on: June 21, 2017, 11:34:42 PM »
hello,

i search for an program or what ever,
that only show my balances (for 6 account).........

if it would log at a fix time, that where great, but not importend......

do anybody know that or is it hard to program ?

its only one little funktion......

i need the balance (mostly in btc) on a few accouns in eth, usdt or usd

13
know i have try the nightvision gui the first time on win10 !
and it looks amazing !
but i sadly still use gunbot via batch, becouse sometimes the gui or what ever make errors and everything crah..... (i use much pairs and it takes much time, to restart all (;)

i have the first time try out the multi-desktop-feature.....

i test gunbot an all three exchanges with each 2 account .....

so i have 6 accounts..... (with all together around 400 pairs ^^)

but how ever.....

maybe in the new version (gui) it where fine, if you can seperate the pairs for each account and if you can add a second accound for an exchange.........


14
Technical Support & Development / feature request: payout managment
« on: June 18, 2017, 07:03:12 PM »

thats only a short idea.....
its not very importend and atm i have no really idea how to do that........

but i want to run gunbot for "earning money"...... (year we all do that)
but i want to payout X every month......

a feature, that i can tell gunbot, "i want to payout xxxusd or xxxbtc or what ever" on this day or in x days or whatever.....

so that gunbot trade with the hole balance, and if i want to payout, than gunbot keep xxxusd/xxxbtc free.....

but i thing thats really "tricky", becouse gunbot dont can see in the future and know how long a trade is open and i trade on different accounts......
if the btc price is low then its better, to payout from the usd/?? or usdt/?? account.....
if the btc price is high, than its better to payout from the btc/?? account and so on......

maybe somebody have an great idea, to handle/manage this !? ......



15
i had open much topics................ this should be a "collection" of all my suggestions or suggestions that i like.........

i hope you like the ideas !??!
(if i can help, please let me know ! (: )

and please let me know, what your think about it.........


bag-handling:
https://gunthy.org/index.php?topic=426.0

https://gunthy.org/index.php?topic=409.0

https://gunthy.org/index.php?topic=466.0

https://gunthy.org/index.php?topic=99.0



trailing buy/sell:
https://gunthy.org/index.php?topic=464.0



logging and export:
https://gunthy.org/index.php?topic=402.0



"look" and other features (like "auto balance managment" and "start all pair - dialoge"):
https://gunthy.org/index.php?topic=454.0

https://gunthy.org/index.php?topic=422.0

https://gunthy.org/index.php?topic=488.0

https://gunthy.org/index.php?topic=477.0

https://gunthy.org/index.php?topic=520.0

https://gunthy.org/index.php?topic=465.0


i think this is also a good idea (maybe make a button/checkbox on the settings window of the gui (for each pair) "no new trade after sell"):
https://gunthy.org/index.php?topic=457.0

https://gunthy.org/index.php?topic=540



i also would like a (hidden) feature "sell all coins ! now !" becouse i often make tests and if all my balance are in "bags" and i want to test new settings, then the lost is not importend, i want to start with btc only and without open trades......
or for the case, if you direct need all you btc/money ^^



email notification or something like that (for vsp and raspberry users):
https://gunthy.org/index.php?topic=405.0





at the beginn, i was not so satisfied about gunbot........
but then gunther released a new version and i was suprised (: .......
atm i think gunbut is amazing (if they dont be the bags (; ).......
but if you add this features, i think gunbot is unstoppable = money printing maschiene = the best robot at the market with much distance (;

i have look at some robots and so on......
ok haasbot have (to) much settings and so on, but it is more expansive and you need to pay per month......

with this changes
gunbot have only a few settings, but enough to change much (: .........
than gunbot can handle bags on its own and maybe via the trailing system it can make more profits......
and we not longer need the poor exports from the exchanges, becouse gunbot can make an very complex log for all exchanges together (if you use gunbot at more exchanges at the same time)......
so that it is easier to search for the right settings or to print something for the taxoffice (if you like (; )

and gunbot can do its job alone on a vps and if it need you "help", then it can email you ^^
maybe it can email a smart status report (balance, profit in %, amount of trades) every day........



edit:
i think the export feature is fine, but no longer importend, becouse they are some good websites, like cointracking or so on (;
on the other side a indipendet solution is nice , too (;


edit2:

of course backtesting (;

https://gunthy.org/index.php?topic=585.0

16
hello together !

when the new version is released and everything is prepared and tested,
i want to start a "contest" to find the best settings/exchanges  :P .....


my rough plan is:

i want to run gunbot (with same balance)........

on poloniex on two accounts
1. BTC/? (BB) - around 50 Pairs
2. USDT/? (Stepgain) - around 10 pairs


on kraken on two accounts
1. BTC/cryptos (BB) - around  pairs - around 5 pairs
    BTC/Fiats without USD (Stepgain) - around 3 pairs
2. USD/? (Stepgain) - around 10 pairs


and two accounts on bitrex ......
1. BTC/cryptos (BB) - not shure how much, but much as possible ^^
2. ETH/cryptos maybe BB, too) - not shure how much, but much as possible ^^


BB means bollinger band with this settings
LOW_BB: 30,
HIGH_BB: 30,
BUY_LEVEL: 3,
GAIN: 2.5,
SECURITY_MARGIN: 30,


and step gain means (a mix of cryptonauts serial killer and gunthas supergun):
BUYLVL1: 0.6,
BUYLVL2: 2,
BUYLVL3: 10,
SELLLVL1: 2,
SELLLVL2: 4,
SELLLVL3: 40,
SECURITY_MARGIN: 60,



i choose this settings, becouse i think, that are good for the most pairs........
and i want to use step gain, for the fiat pairs, becouse, they (normaly) go more up, compared to the BTC/crypto pairs.....

i want to split the balance throght the half of the pairs (balance for each pair)..... so that the most time a maximum of the balance is at work (in trades).

i want try to note the balance (of each account) every day (at the same time) and calculate the daily profit....... for 3-4weeks....
and so the balance is not really importend, becouse the interesting thing is the profit (%) and the profit (%) for the hole time  :D ....
 

have anybody an idea or suggestion for better settings or something else to make better ?

is anybody interested, to support me ?
maybe do the same, but with other settings - to compare ?
(but that only really make sense, if we start only with the majorcurrency on the account and at the same time)

i dont know wich new functions do the new version have, but i will handle bags in this way.....
wait three days and then set an order via hand....

in the next days i will define some exacter "rules" (:


17
that are not really importend things, but maybe it help or make some easier or give a better overview (;

(picture at the end (; )

1.

you can set the max balance to trade for each pair and you can set it for all.........

maybe in the gui it where a little bit better if you can change between a "global" value and a pair-value......

maybe this is a solution ?:
you can set an global value in the "all pairs config"......
and in the gui you can write a value or you can write "global".....
and in the settingfile for the pairs is a variable for global: yes or no.........

i thing the most time, the most of us trade all pairs with one value, or not ?  and maybe adjust the value after a time (for all)......

but maybe sometimes you want to try out one or two pairs with an other value !? or you have 2-3 "special" pairs with an other majorcurrency...........

and the same for the security margin (;

another addition where, that you can choose between "pair-value", "global" and "auto".......

but "auto" is a little bit complex, becouse you need a rule, for example "gunbot should every Y (day, week, month), split the balance throught X (X= amount of pairs, or amount of pairs/2 or a value) - thats means (auto) reinvest the profit (; .......
but i thing every hour or every day is a little bit "silly" becouse the balance dont only go up, they are some days where the balance wanes and on the next day it grows and so on......
so i guess every 1-2-3-4 weeks should be ok.........



2.

another thing is the "total profit BTC" value in the console ........
if you trade with eth or xmr or usd as majorcurrency, they is still shown "total profit BTC" but with the value of the majorcurrency......

my suggestion is,
only show the profit as the majorcurrency (only delete the "BTC" after "total profit") ^^
........and maybe log it (for each trade) (:

i think gunbot can much better log things, like the poor polo-export (:



3.

and another thing is the window, if you start a pair........

they is a window/box in the forground (repeat or cancle).......

is it possible to do that, without this window or in the background ?

for example if you start 50 pairs and want to make other work on you computer, it take a while and it is boring ^^



4.
maybe it where fine, if gunbot save the apikeys in a dropbox (and fix it to the secretkey ....and the market) ?

so you easy can choose it, if you add a new pair



5.
maybe a dropbox for the pairs where fine, too.....
maybe two dropboxes for each currency or one for the pais.


6.
maybe you can arrange the things a little bit other.....

for example.......

on the left side (buy)          on the right (sell)

(strategie)
BB                                        BB

(gain)
buy level                              gain

(bollinger band)
% lower BB                           % upper BB

(ping pong)
buy price                              sell price

(new step gain)
buy level 1                           sell level 1

buy level 2                           sell level 2

buy level 3                           sell level 3



7.


i like the feature to save and load configs, becouse so you can save two different configs, if you want........
and i like it, if you click on one pair (on the right side) that gunbot automatical show the settings and the console for this pair......

but maybe you can put the things on the right side together ?

you have above the pair and can click on it and below, too.....

maybe it looks a little better, if you put the start, stop, load and save things complete up or down and only one thing to click for the pair......
and i case of the exchange maybe another colour (or only a short form like P for polonie, K for Kraken and B for Bitrex) to save place ?

like this:

start     stop     save   load               gunbot v3.3 - copyright and so on

(P) BTC/STR(K) BTC/STEEM  | (B) BTC/SC

settingswindow

console


and in the upper window / settingswindow, i think it is not really nessasary to display the settings again, becouse gunbot show the settings already on the left (:

but it where very fine, if gunbot log the settings for each trade (;


8.

and on fullscreen, i dont can read the last setting ......
i think "bot failure delay" ??


9.

and maybe you can renounce for the explanations and in case of this make an screenshot or an short paper, where is discribed, which setting is for what........



how i say, thats only  little things and not really importend.........

i think the night version is very great, and gunther had made a great work !

but sadly it not really work for me completly ):

much errors on polo and kraken (bitrex-iam not shure, i dont use it)




but what do your thing ?? (:

(i dont have change the poloniex-BTC_SC thing) and it was a fast work (;

i have try my best, sorry for mistakes and so on (;

https://picload.org/view/ripigrow/bot.jpg.html


that are all only "inspiration", gunbot is great, but the problems are the eroors atm ):

@ gunthar, if you like my ideas, than i maybe can try to help you, to programm.......
i can programm in different languages, but i dont know wich one you use........and sadly i have much work/problems atm ):


18
hi,

sorry iam not shure how i should write it in another way..........

what i mean is, if a coin long time gos normal up and down and then "apruptly" goes to a higher level and after a short time goes back to the old level........

the problem (that i have) with it, is that gunbot sometimes buy in the peak and then the trade is open for days or weeks, till the next peak........
and the pair is "blocked" for further trades....

the last time i have set an sell-option via hand so gunbot was able to trade this pair in the lower level....
and then there was a peak again and the old trade close with a little profit, too......

i thing the best were, if gunbot dont buy in the peak, but if that not (technical) possible, than maybe an other solution where, that gunbot detect the big difference between the buyprice and the actual price and set an sell-order on his own and go on trading on this pair (in the lower level), to make some profits till the next peak (;

another idea where an (email) notification or so on, if the price falls to much (from buying price), so that you can decide on you own, what you want to do.....

i hope your can understand what i mean ? (:

19
hi,

its only an idea......

if you run gunbot on an vps and let it do its job......

maybe it is helpfull, if gunbot send you an email, if there something importend or if there something, you should know or react.......

for example......... to less balance, or an message if the balance have reached an definated level or if there are rrors, that gunbot dont can handle on his own or so on..........

maybe its usefull for somebody (;

or if you are on holyday an dont want to check the gunbot every day or so on (;

20

i would like, an export-function, as .csv with this values:

open - time, price, fee, pair
close - time, price, fee, profit
and the settings for this trade
(maybe numbering of the trades)


and an excelfile, that can calculate this (out of the .csv):

duration, fee and % for each trade

and at the end:

amout of trades per pair,
profit per pair,
fees per pair,
average duration per pair

amout of the whole trades,
whole profit,
whole fees,
minimum, maximum and average duration for all trades


profit per day, week, month
and maybe an field for costs (like server or electricity), and maybe, maybe an field for taxes ^^

this where unbelievebil great, becouse so its very easy to analyse and search the right pairs and settings and print something for the tax office or so on......


but the most of this are excel things ^^
gunbot only need to log the few importend things, becouse i think gunbot can do this much better, that the poloniex-export-file, for example....(only with the poloniex file it is not easy to connect an buy with an sell in excel !?)
and kraken......hmmmm....i not really like the look of the side ^^...

but if i have see it right, than gunbot still log much, but separatly for each pair !? (but without the settings)


Pages: [1] 2