Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sbogovac

Pages: 1 2 [3] 4 5 6
41
Beginners & Help / Re: Is it possible to set up pure BB strategy?
« on: December 23, 2020, 09:24:39 AM »
What if I don't want Gunbot to care about price trends, MA, EMA, and all that stuff?
I just want it to buy when the price goes below the BB minimum, and sell when it goes over the maximum.

You just use BB strat (but you do understand that BBands actually need stuff like MA to calculate the standard deviations and thus the BB so you'll always have to set the periods of moving averages you'd want to use for those calculations)...

42
I've got my strategy on mask, and when I change something it gets immediately reset to its initial values.
This happens every few seconds.
I can only write down values and save if I'm very quick.
What the hell?

Try "stopping" the bot before applying any changes (red stop trading button top right corner)....

43
Technical Support & Development / Re: Gunbot v20.4.5
« on: December 18, 2020, 03:43:10 PM »
Everything working after a PC restart!

Now one question: why I can't choose a pair that I want and there are pre-defined pairs available???

That depends on the pairs that are offered by the exchange you want to use...

44
Technical Support & Development / Re: GB 20.7.5 and Kraken
« on: December 08, 2020, 04:16:14 PM »
Did you try to install the full 20.7.1 version (including node14) first...?

45
Beginners & Help / Re: Using different trailing ranges per DCA cap count?
« on: November 20, 2020, 10:51:27 AM »
I'll have to try the autoconfig sometime and see what it has in comparison. The previous post a year back that had done this was obviously running a pre-autoconfig version of the bot though exploring every options screen I can find it doesn't appear to be a thing. I was thinking this would require some more in-depth modifications to be made instead of using the standard settings menus. Given this hasn't received many views I'll probably have to go back to searching the forums in hope I can find that old post again to see how it's done.

Any help / advice from more experienced users would be great though. Thanks for your time everybody! /cheers. :)

Now that v20 has been released as stable the Wiki has been updated too and autoconfig has been properly documented: https://wiki.gunthy.org/how-to-work-with-gunbot/extras/autoconfig

46
I might be reading too fast, but according to the Wii it's still (should be) related to last buy: https://wiki.gunthy.org/trading-strategy-options/dollar-cost-avg-dca

47
Beginners & Help / Re: Using different trailing ranges per DCA cap count?
« on: November 13, 2020, 10:52:30 AM »

 Hello everybody! Been a while since I've been around but it's great to see things still progressing here. A year or two back I remember seeing a thread where a guy had created the ability for the bot to place trailing DCA orders at different percentages depending on what number of it's cap count it was on. I've searched the forums and can't seem to find it again. I'd like to try this out in the newest v20 of the bot and am not sure where to start. Example: DCA #1 is purchased on a trailing of 0.25%, DCA #2 is purchased on a trailing of 0.5%, and DCA #3 is purchased on a trailing of 1%. I never fully explored the previous persons post about this so I'm not sure how he achieved this I just remember seeing it. Any help would be greatly appreciated.

Thanks in advance, /cheers!

Seems like something that could be accomplished using autoconfig.

48
General Discussion / Re: Bought Gunbot in 2018
« on: November 02, 2020, 02:18:25 PM »
I researched and found the license system has changed is it necessary to have gunthy wallet now?
-How do I link my old license to the gunthy wallet.
-Can I still run my old license on legacy gunbot versions in which Gunthy wallet is not necessary.

Regards,
Leblock

Hi there! Yes, you need a Gunthy wallet nowadays to run your GB. Your reseller should be bale to help you with that. Good luck!

49
Technical Support & Development / Re: Gunthy-EXE Not starting
« on: October 26, 2020, 03:33:43 PM »
Your reseller should help you set up.

50
Beginners & Help / Re: old licence reactivation
« on: May 04, 2020, 01:34:00 PM »
Hi Gunbotters,

I had a license a few years ago and I'm trying to get back into crypto and trading with gunbot. I was trading back in v5... How do I go about reactivating my old license? Is there someone I can contact?

Cheers

Hi there, I suppose your reseller would be the first point of contact. There have been a lot of changes since then. The biggest one being the implementation of a (Gunthy) token based licensing system and besides installing the latest (stable) build (v18) you would need enough Gutnhies in your wallet for the software to run... see: https://wiki.gunthy.org/setup-and-general-settings/exchange-and-license-settings/gunthy-wallet

Good luck!

51
Hello,
Please can somebody assist with getting this up and running for me? I have gotten as far as getting gunthy-win.exe running but it comes up with the following error message

Loading config...
   info  - socket.io started
GUI Server Deployed: http://localhost:5000
{ Error: SQLITE_IOERR: disk I/O error errno: 10, code: 'SQLITE_IOERR' } 'Uncaught Exception thrown'

I have checked port 5000 and it appears to be open so its not that, what am i missing please?
TIA

Hi there bud, just a friendly fellow user reacting here. Actually a Linux user myself but I would urge you to contact your reseller for direct support helping you get your Gunbot up and running... might be quicker than waiting on a reaction on a public forum. Good luck!

52
I activated PANIC on my strategies to switch all back into BTC.
But with 1 Pair BTC-SOL it went into a loop selling, directly buying  back, and then again selling etc.
Thank god I saw it cause telegram went bserk. But in 30 sec lost 0.05BTC before I managed to kill the bot......
WTF is wrong here? If I can't even trust the PANIC of my pro version of which I payed a lot of money for....
Look at the picture I posted and see that sell and directly rebuy....

Hi there, just a friendly reaction here from a fellow user: but you might want to ask your reseller for support on this particular issue (rather then post it here on a public forum)... seems important enough to me.

53
Beginners & Help / Re: Paying fees with Bittrex Credits [BTXCRD]
« on: April 29, 2020, 08:43:34 AM »
Hello.The fees are set to 0 and still pays them wth base.

Are the fees on that exchange 0?
The question is how to force GB to pay with Bittrex Credits on Bittrex.Its not Zero ofcourse.

I'm not on Bittrex, but sounds like something that would be set at the exchange (at least on Binance - for BNB - it is)...

54
General Discussion / Re: Absolute value stop loss?
« on: April 29, 2020, 08:42:09 AM »
Sounds like something you might be able to "autoconfig"... have you looked in that direction?

55
Beginners & Help / Re: Paying fees with Bittrex Credits [BTXCRD]
« on: April 28, 2020, 03:01:14 PM »
Hello.The fees are set to 0 and still pays them wth base.

Are the fees on that exchange 0?

56
General Discussion / Re: Stop gunbot from a external aplication?
« on: April 20, 2020, 08:52:25 AM »
Hi there, nice initiative!

And very good experience too. I just wanted to add a couple of thoughts:

1. Why does your GUI crash often? Are you sure your system has enough resources? I do not recognize that behavior myself...

2. You do know that a new GUI is on it's way (and should be released "soon")?

3. If (you are) not aware of 2. maybe you should consider joining one of the customers telegram channels? Communication goes a lot quicker there...

Anyway good luck and enjoy!

57
Technical Support & Development / Re: Gunbot licence API
« on: April 17, 2020, 02:09:48 PM »
Put your old API back in and let it run. Then go to GUI and swap exchange the new one IN ADDITION to the WORKING one.

If you have a Gunbot license that only allows one working API key then you need your reseller to swap it for you (but then you're OK since you want to use the "old" one)...

58
Beginners & Help / Re: Buy Price more decimals than Order
« on: April 07, 2020, 09:16:20 AM »
I don't trade on Kraken (and the rounding difference seems trivial to me) but I would advice to ask your reseller:

1. he's responsible for 1st line support questions; and,

2. let him send you an invite to the Gunthy Elite Telegram channel. You'll get answers (a lot) faster there...

Good luck!

59
Apparently you were right i didn't had that setting it was empty i thought default would be 0, after setting the fee to 0.1 and setting gain to -0.1 the exit still slightly higher i believe is because the double fee entry+exit i think that was it.

Thx bro that was my bad.

You're welcome!

60
Hmkay... 2 things:

1. Have you set your fees correctly? And,

2. Ask your reseller to invite you to the Gunbot Telegram chat. You'll get answers there (much) faster...

Pages: 1 2 [3] 4 5 6