Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Aitor

Pages: [1] 2 3 ... 27
1
Try changing your api key for a new one. It usually fix this issue.

2
Beginners & Help / Re: Kucoin API - Rate Limit Exceeded
« on: March 16, 2022, 04:44:12 AM »
Hi, try stopping the bot for some minutes and start it again with a higher delay.

3
Hi, do you have any pair added to your Gunbot settings?

4
Beginners & Help / Re: Newbie short/long binance futures
« on: January 17, 2022, 01:31:18 PM »
Hi
i was trying this syntax but i am getting an error (tradingview alerts)

LONG_binanceFutures_USDT-XRP_40


SHORT_binanceFutures_USDT-XRP_40




TypeError: Cannot read property 'needLock' of undefined
    at status (C:\snapshot\enricoranucci\Desktop\STABLE\bot.gunbot.js)
    at Timeout._onTimeout (C:\snapshot\enricoranucci\Desktop\STABLE\bot.gunbot.js)
    at listOnTimeout (internal/timers.js:549:17)
    at processTimers (internal/timers.js:492:7) Uncaught Exception thrown


emailParsed {
  timestamp: 1642050908164,
  type: 'short',
  exchange: 'binancefutures',
  pair: 'USDT-XRP',
  tl: '40',
  price: undefined
}

:))


Remember the alerts must be written in CAPS, like this:

LONG_BINANCEFUTURES_USDT-XRP_40

Also remember to add at least 1 pair in the bot

5
Technical Support & Development / Re: SpotGrid Advanced Issue
« on: January 09, 2022, 06:36:29 AM »
I checked this with Spot Grid and sometimes it sells a bit less while sometimes sells a bit more... so it's something that doesn't affect in the mid-long term results. Anyway, dev team is already aware of it.

6
I checked this with Spot Grid and sometimes it sells a bit less while sometimes sells a bit more... so it's something that doesn't affect in the mid-long term results. Anyway, dev team is already aware of it.

7
Hi, we talked via Telegram some minutes ago. As I told you, despite the PNL is shown as USD, it states the profit in you base coin, that is, ETH.

8
Hi, My StepGrid strategy keeps selling at a loss, I don't think it is supposed to be doing that?

It will DCA / buy down in steps. Then it will sell some at a profit, then all of a sudden it will decide to sell bags it bought higher up as well, at a -PNL loss.  :(

I haven't changed the quote currency or done any manual trading on the active pairs. I have added some base currency to my spot account whilst the pairs have been active, which I wouldn't imagine would cause this issue?

Appreciate any insights, this is concerning. D5

It's a loss if you compare with average bought price. It's profit, if you compare with latest bought price.

9
This is how spot grid works. If it sells it sells with profit.

It's not buying the same thing at the same price, it's closing a cycle with profit, for example, selling 0.10 BTC with 2% profit, and then, at the same price, it buys 0.01 BTC and starts a new cycle.

10
Hello, just as the title says.  I want to trade perpetual futures pairs through Okex in gunbot.  I have gunbot all setup with the okex5 API key, it's set to swaps, but when I go to enter a trading pair, the only ones it brings up are their futures (weeklies, monthlies, quarterlys etc).

It says in the wiki its possible to trade perpetual futures pairs through Okex on gunbot.  Is there a resource that shows the syntax for typing in the pairs that you want to use?

thanks!

As far as I know it's not possible yet. There will be some tests in January.

11
It's not possible to do that for that strategy, it would mess the calculations.

12
General Discussion / Re: Gunbot faulted out and will no longer start
« on: December 22, 2021, 09:25:30 AM »
Gunbot has suddenly decided it doesnt want to load anymore. Below is the error its throwing repeatedly.



Your registered exchanges:
KRAKEN:

Loading exchange - kraken
Loading data....
TypeError: Cannot convert undefined or null to object
    at Function.keys (<anonymous>)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at isEqualTwoData (C:\snapshot\enricoranucci\Desktop\STABLE\gui\classes\common.js)
    at Timeout._onTimeout (C:\snapshot\enricoranucci\Desktop\STABLE\gui\sockets\coremem.js)
    at listOnTimeout (internal/timers.js:549:17)
    at processTimers (internal/timers.js:492:7) Uncaught Exception thrown

Tracked it down to the following pair in the config file
"USD-STORJ": {
                "strategy": "bbta-tssl",
                "enabled": true,
                "override": {
                    "TRADING_LIMIT": "20",
                    "MIN_VOLUME_TO_SELL": "10",
                    "MIN_VOLUME_TO_BUY": "10",
                    "BOUGHT_PRICE": null,
                    "PERIOD": "1h"
                }
            }

I set bought price to a value since I imported several hundred coin to the exchange. Gunbot eventually sold it. Looks like Gunbot set the bought_price to null then
got all upset about it. Gunbot should have deleted the entry alltogether when it was no longer valid. I would call that a bug.

What version of the bot are you using?

Try removing the line  "BOUGHT_PRICE": null,

13
General Discussion / Re: KuCoin Futures/Margin Support?
« on: December 22, 2021, 09:17:44 AM »
Not yet.
*poke*

Any upcoming news, or reason as to why it hasn't been supported yet?  I know KuCoin is only growing in it's usage levels and userbase.

No news yet.

14
Technical Support & Development / Re: Backtesting help
« on: December 21, 2021, 03:01:27 AM »
Hi, you have to set the parameters manually in your TradingView account.

15
Beginners & Help / Re: Binance license reactivation
« on: December 15, 2021, 02:15:37 AM »
Hello all! I was a gunbot addict back in 2017 and have since lost access to the email associated with my crypto trading accounts (tenrectrader@gmail.com), as well as the phone number I used with the Telegram chat channels. I want to reclaim this license and start trading again and I understand I need to contact my reseller, but I'm not entirely sure who my reseller was. I have my gunthy wallet recovery phrase at hand along with the API key and secret that were last associated with my gunbot license. Please let me know how I can rejoin this amazing community! Thank you all for your time!

Send me a PM please.

16
Hi all, thanks for your replies. I have corrected the fee values, but there still was no trading with USDT-BTC pair. After this, I tried USDT-ETH which works perfectly for two days now (although the ETH course crashed badly!).
I will give BTC another try, but for now I am fine.

Cheers,
Stephan

I would need to get more info to be sure. Most likely you already bought BTC and the bot is taking it into account. I recommend you to use the label IGNORE_TRADES_BEFORE to tell the bot to take only into account trades from today onwards:

https://wiki.gunthy.org/trading-strategy-options/misc/#ignore-trades-before

17
I agree, check your fees, they are huge.

18
Hi, I am new to Gunbot and just had my license activated yesterday.
I am connected to Kraken and want the bot to trade USDT-BTC with having some 150 USDT in the Kraken account. I am still using the default trading strategy (spotGrid), but there did not happen anythin within the last day. Can someone pls step forward and share his pair and strategy settings? I am pretty sure that i am having a cruzial setting wrong ... any help or hint appreciated.

Thanks,
Stephan

Hi, it would be needed to get more info about the issue. Are you getting any error message in the console? What's your Trading Limit and MVTS?

19
Aitor thanks for your suggestions, I ended up stopping using the strategy on kraken and I am using only the stepgrid autocontroller on binance.

Anyway yes, I also think that there must be some default value that makes impossible or very difficult for the bot to buy on Kraken.

timalan34 maybe you can compare the code for binanceus and kraken and see what is different

Some autoconfig variables are extracted for Binance and not for Kraken. Most likely that's the reason. I have coded some autoconfigs that can't use some features on Kraken because of this.

20
Beginners & Help / Re: Open a Sale and Close with a Buy
« on: November 17, 2021, 07:12:26 AM »
You can do it with Ping Pong strategy (2 instances, 1 for buy and other for sell) and some Autoconfig.

Pages: [1] 2 3 ... 27